CROW CAMS PERF. CAM & CHIP PACKAGE FOR HOLDEN COMMODORE VS VT ECOTEC L36 3.8L V6

$785.00

If you think you've gone as far as you can with bolt-on performance parts or you are rebuilding your Holden V6, it's time to consider the benefits that only a high-performance Crow camshaft and memcal package can bring to your V6 engine.

Our Crow cams performance cam & chip packages have been developed over a number of years, so you can be assured of quality and excellent value for money. For customers wanting an aggressive cam package we've come up with memcals to suit our range of Crow cams, as shown below:


Stage 1:

This cam and chip package is designed for naturally aspirated applications where street-ability is important, while still providing great performance. It is designed for the naturally aspirated Ecotec engines and its one of the very few cams on the market that don't need a higher torque converter or gear changes to see gains. You can expect up to 15-22 kW gains depending on your car's current configuration.


Specifications:

  • 210°/210° at 0.050"
  • Intake Lift 0.317" (0.507" lift at 1.6:1 rocker ratio)
  • Exhaust Lift 0.317" (0.507" lift at 1.6:1 rocker ratio)
  • 113 LSA


Stage 2:

This cam and chip package is designed for use with totally stock heads, and stock valve train. Upgraded pushrods are recommended but not needed. Revving past 6200 RPM will require upgraded springs. Either 90 or 105# springs are recommended for high RPM use. This cam is designed for naturally aspirated applications where maximising the performance of stock heads is important. Idle is lumpy, especially with extractors. You can expect up to 19-26 kW gains depending on your car's current configuration.


Specifications:

  • 216°/216° at 0.050"
  • Intake Lift 0.317" (0.507" lift at 1.6:1 rocker ratio)
  • Exhaust Lift 0.317" (0.507" lift at 1.6:1 rocker ratio)
  • 111 LSA


Contents:

  • 1 X Crow Cams camshaft
  • 1 X Chip (memcal)

Vehicle Fitment Guide


Parts Guide


(CCP645, CCP646, CCP647, CCP648 and CCP651 are out of stock and will be replenished shortly).


Notes: 

  • The images are for illustrative purposes only.
  • For the 2000 build WH series, please check your vehicle if it is running memcal or computer before making a purchase. Cam and computer packages for 2000 build WH series can be purchased through another listing.
  • Memcals in these packages are calibrated by Mace and we have strict guidelines in terms of what modifications our memcals support. Your setup's compatibility will be determined on the basis of the filled out application form. In case of non-compatibility, you can either change your setup to a compatible one or we can supply you with the package without the memcal.
  • The accuracy of eBay's compatibility table is not always reliable. In case of any confusion, please refer to our above fitment guide to verify your vehicle or contact us for further assistance.


Please remember to check out our other performance products for sale

*You may receive an Address Confirmation email in case our system is unable to verify your delivery address based on our address database*

E4639

Returns Policy

At Mace Engineering Group, we take great care in packaging of your products appropriately to ensure that they arrive in perfect condition. If for any reason your product is damaged during shipment, please contact us immediately to arrange for the return of your product(s) within 14 days. We will then provide you with a replacement product as soon as possible.

If you receive a product with manufacturing defect, it must be returned within 14 days. After appropriate testing, if it is found that the defect is due to misuse, willful damage, unauthorized repair or tampering with the product by the customer, return will not be accepted by Mace Engineering Group. Strictly no returns/refunds will be given due to buyer's change of mind or remorse. This is in compliance to the ACCC warranties and refunds.

Re-Stocking Fee & Refunds

If a purchased item is returned due to buyer's remorse or misorder, 10-15% re-stocking fee will be applicable at our discretion, depending on the item.

Paypal has changed its refund policy and will no longer refund the fees deducted for the original transaction, therefore, Mace Engineering Group will deduct the 2% fee while making a partial or full refund other than the restocking fee, if applicable

Postage cost is non-refundable.

Domestic Orders

      • Orders typically take 1-2 business days to prepare and process prior to dispatch.
      • Freight may take 1-7 business days from the date of dispatch to delivery within Australia.
      • Orders can also be picked up directly from us on business days. Please email us.
      • Orders are neither dispatched nor delivered on weekends.

International Orders

      • Shipping will be calculated automatically based on the delivery address.
      • Orders outside of Australia may take up to 10 days.
      • You will be responsible for any applicable taxes and/or duties and will need to be paid upon delivery.


**Saturday and Sunday ARE NOT business days**

Product Warranty

Mace Engineering Group products are covered by a 1 year warranty, unless otherwise specified in the ad or written agreement from Mace Engineering Group.

Terms of Warranty

Customer must return the defective item(s) first, with a full description of the problem. Appropriate tests will be conducted to determine the authenticity of the defects and claims. Once, Mace Engineering Group is satisfied, identical items(s) will be sent out to the customer.

Please ensure proper packaging of the product to prevent any damage while in transit, as goods are at owner's risk.