eBay

Description

BNC Cable
Easy to install and can be linked to DVR, VCR, DVD Recorder, TV, Capture Card, Multiplexer etc
All you have to do is plug this into your CCTV camera with the BNC and power and run to your DVR / Recording device and plug them in, put the red cable into the power adapter (available in our shop) into your socket behind your DVR.
Some Cameras may require a BNC to phono adapters (available in our shop)
We recommend that you run the power through the cable to the camera to prevent Ground Looping
Ground Looping: This is an inset from a search engine result for 'Ground Looping'
In CCTV, ground loops can be seen as hum bars (bands of slightly different brightness) scrolling vertically up the screen.
Low current wiring is particularly susceptible to ground loops. If two pieces of audio equipment are plugged into different power outlets, there will often be a difference in their respective ground potentials. If a signal is passed from one to the other via a video connection with the ground wire intact, this potential difference causes a spurious current through the cables, creating an video buzz at the AC mains base frequency (50 or 60 Hz) and the harmonics thereof (120 Hz, 240 Hz, and so on), called mains hum.

Features:

- For Use with Closed Circuit Television (CCTV) applications and security cameras
- This pre-terminated CCTV cable is perfect for transmitting video and power.
- Simplify the installation of surveillance systems by using one cable to carry video and power.
- No Need to waste time, soldering or crimping together your own cables.
- Most cameras come with only a few feet of cabling.
- This kit includes extensions for the power and the video signals.
- For cameras with a DC power only.

Specifications:
2 in 1 Video/Power Cable with - (1) Video Connection : BNC composite video (yellow)
(2) DC Power Connection (red):
1 x 2.1mm x 5.5mm x 10mm Male Plug
1 x 2.1mm x 5.5mm x 10mm Female Socket (Centre Positive)
Length:
5 Meters (16.4 Feet )
10 Meters (32.8 Feet )
15 Meters (49.2 Feet )
20 Meters (65.6 Feet )
30 Meters (98.4 Feet )
40 Meters (131.2 Feet)

Package Included:
5M / 10M / 15M / 20M / 25M / 30M / 40M BNC Video Power Cable

BNC TO BNC

Connector type: BNC female to BNC female

Contact method: Straight

Used for video or audio signal transfer

Can be used to join two male BNC plugs, or as gender changers

Impedance: 50/75 ohms

Transmission power: the maximum transmission power of 260W

Whether rust: yes (anti-oxidation rust-proof material)

Material: Antioxidant copper plating

Insulating plastic material: Teflon (high temperature resistant material)

BNC To RCA

High quality RCA phono male to BNC female adapters used to convert any RCA Phono to BNC Plug.

Typically these adapters are used by CCTV equipment, Can be used to connect CCTV camera to TV, VCR or DVR, use regular RCA cables.

Convert BNC female to RCA Phono male Plug Coax Adapter Connector.

BNC locking mechanism designed for the easiest, highest quality connection

Suitable for converting a phono plug connection to a BNC plug.

Useful for connection to CCTV monitors and to older video equipment which uses BNC connectors.

Use of this adaptor converts the BNC video input or output to a phono connection.

Phono connecting leads are more widely available and the use of this adaptor facilitates their use