Latest version of the Tiny series! 

General

The TINY CX is the new, further developed version of the TINY C07.

Unlike the previous model, the battery on the TINY CX can be changed.
This results in even greater flexibility in use - if the battery is empty, the device does not have to be charged first, but the battery is simply replaced.

The TINY CX is delivered in a practical plastic case.

The device

The TINY CX is a handy, battery-powered fog machine that impresses above all with its easy handling and quick operational readiness.

With a minimum heating-up time of less than one second, the low weight (630 g) and small dimensions (L = 25; W = 5.3; H = 5.5 cm), this device offers the user the right solution in many areas .

Whether in the theatre, in film, television and photography, in musicals or for special effects, for flow and leak tests - wherever fog is required quickly and efficiently, the TINY CX is the right alternative to mains-connected devices.

The technique

All machine components are housed in a very small space in a stable housing.

As with the TINY FX, a microprocessor that controls all important functions and constantly monitors them during operation is the heart of the machine. This ensures continuous machine performance with optimum safety standards.

The TINY CX is supplied with the necessary operating voltage by a compact rechargeable battery (L = 10.5; W = 4.4; H = 4.1 cm). The battery is simply pushed into the device and can be quickly changed if necessary.
Thanks to the intelligent control, energy is only drawn from the battery when fogging is also taking place. This increases the operational readiness of the machine many times over compared to conventional battery-powered machines.

The operation

The TINY CX is immediately ready for use. The battery is inserted and the fluid tank, which is permanently installed in the device, is filled with original Tiny-Fluid. The fogging process can be triggered immediately, without any heating-up time - and continuously.

The internal battery allows continuous fogging of approx. 10 - 15 minutes or up to 150 bursts of 5 seconds each.

The TINY CX can be conveniently operated with one hand. The release button is integrated in the housing cover and can be pressed with the thumb.

The original Tiny-Fluid ensures dense fog with the lowest fluid consumption (2.3 ml/min. with permanent fog).

Optional control

The TINY CX can be optionally controlled in various ways:

Using radio remote control or cable remote.

With the help of a DMX converter, the device can easily be controlled via DMX 512.

A timer can be used to set and call up fogging and pause times for the device.

Advantages

• Small dimensions, low weight
• The battery is only charged when the fogging process is triggered - this means that the machine is ready for operation for a long time
• Battery easy to change
  
• Heat-up time less than 1 second
• Continuous, even output
• Fog time programmable
  
• Permanent fog possible
• Triggered by a button in the housing and optionally by cable remote, radio remote control, DMX converter or timer
• Low fluid consumption (2.3 ml/min. in continuous operation)
  
• Easily change the evaporator when needed
• 
  
• Manufacturing and service in Germany

Technical specifications

 SCOPE OF DELIVERY : integrated fluid tank 50 ml, battery pack 11.1 V, charger, 250 ml Tiny-Fluid, carrying case