The Sennheiser MEB 114 B is a sturdy on-table boundary layer microphone. The MEB 114 constitutes an improvement for any conferencing system. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
Specifications
- Dimensions: 3.34 x3.93 x0.98 in (W xD xH)
- Connector: Miniature XLR-3 Pin
- Frequency response: 40 Hz-20 kHz
- Max. sound pressure level: 140 dB
- Transducer principle: pre-polarized condenser microphone
- Weight: 10.26 oz
- Pick-up pattern: cardioid
- Nominal impedance: 200 Ohm
- Phantom powering: P 24-P 48
- Operating temperature: 14° to 122° F
- Equivalent noise level: 29 dB (A)
- Equivalent noise level weighted as per CCIR: 468-3: 39 dB (CCIR)
- Current consumption: 1.5 mA
- Acoustics: boundary layer microphone
- Dynamic range: 111 dB (A)
- Sensitivity: 10 mV/Pa
Item Includes
- MEB 114 Microphone
- Cable
- Quick Guide
Specifications
- Dimensions: 3.34 x3.93 x0.98 in (W xD xH)
- Connector: Miniature XLR-3 Pin
- Frequency response: 40 Hz-20 kHz
- Max. sound pressure level: 140 dB
- Transducer principle: pre-polarized condenser microphone
- Weight: 10.26 oz
- Pick-up pattern: cardioid
- Nominal impedance: 200 Ohm
- Phantom powering: P 24-P 48
- Operating temperature: 14° to 122° F
- Equivalent noise level: 29 dB (A)
- Equivalent noise level weighted as per CCIR: 468-3: 39 dB (CCIR)
- Current consumption: 1.5 mA
- Acoustics: boundary layer microphone
- Dynamic range: 111 dB (A)
- Sensitivity: 10 mV/Pa
Item Includes
- MEB 114 Microphone
- Cable
- Quick Guide