IF YOU PURCHASE , PLEASE VIEW THE ASSEMBLY INSTRUCTIONS AT THE BOTTOM OF THIS LISTING.

****************************************************

Duck Mallard Bird WINGS Folk Art whirligig DIY REPLACEMENT SET .

This do it yourself wing kit has been gathered to repair those old beloved ornaments that have not survived so well. These are a set and will spin opposite of each other. With a center hole of 1/8" , it can be enlarged to accommodate the hardware you are using. They  can be drilled out to accommodate larger hardware. ( if you need us to enlarge the hole, just ask and provide the size,  No problem)

Many variations exist and this kit provides the flexibility needed to match the length or shape that your project requires. Cedar is light and easy to cut .

Overall when assembled , this set measures 19" lengthwise and of course can be shortened to match your specific needs.

After glueing , sanding and easing of sharp corners , these wings should be painted and sealed well to last outside in the elements.

We have selected MAHOGANY for the hubs and  CEDAR for the  wings.

Hub has 1/4" slots and a 1/8" hole

The wing blanks are 1/4" x 2-5/8" x 9-1/16" cedar

No bolts are included , assembly required.

************ASSEMBLY INSTRUCTIONS *************

These are square edge parts that will need further  sanding to achieve  a comfortable smooth finish.

The cedar wings are milled to fit snugly into the slot. Being wood , they may have swollen and be too thick. Better too thick than too thin. In this case , sanding the wing thinner will be necessary so the wing fits to the bottom of the slot without splitting the hub.

Shape and sand your parts and we suggest gluing with epoxy. Some folks might even pin it with a dowel .

Sand and paint or stain for a durable finish