Garden Metal Vegetable Precision Seed Drill 7-Row Manual Small Seed Seed Drill

Complete with 7 sleeves, these will need to cut the seeds you plan to sow. The standard diameter of the slots in the bushings is 3-4mm. This size is suitable for seeds - carrots, onions, parsley, dill.

For example, if you want to sow peas, you need to make a 7-9mm hole in the sleeve.

The window in the seed sleeve is made by a seeder. You can also buy another set of solid bushings for $ 1.99.

Modular manual seeder for sowing small-seeded vegetables (carrots, + + radishes, + + parsley, + + cherries, + + cabbage, + + beets, + + peas, + + soybeans, + + salads, + + flower seeds, + + + green manure, + + lawn grasses, + + vegetable seeds, + +), + + and other crops close to those listed in terms of seed size and seeding rate. (cell size for seeds 3 mm, + ++ 4, + +5 mm, + + + 9 mm)

(One to seven rows can be harvested from the drill)

Seeder specifications:

A seeder of a collapsible design.

The number of simultaneously sown rows is 1-7.

Row spacing 60 mm.

Seeder width 600 mm.

Principle of operation

The principle of operation of the seeder is based on the rotation of the seeding device sleeve, + + into calibrated indentations (3 mm, + ++ 4, + + 5 mm, + + + 9 mm)), from which the sowing culture acquires seeds. The rubber stopper leaves one or more seeds in each recess of the sowing sleeve (depending on its adjustment), + + which are ejected into the furrow by an original ejector. The seeding density depends on the spacing of the grooves in the seed sleeve and the adjustment of the stop.

Sowing is carried out in well-prepared soil in the usual way with row spacings + +, corresponding to the technology of sowing individual crops. After sowing, the soil is rolled up and + + if necessary + + mulched and watered. After work, clean the seeder of soil and seed residues.

Seeder

The seeder consists of seeding units with hoppers, + + planted on a common shaft. Seeder bushings have a similar design and function, + +, but are not interchangeable due to the different pitch of the seed recesses. Each sowing unit is equipped with one sowing sleeve for sowing seeds of radish, + + carrots, + + parsley and is fixed on the transverse link of the seeder with the possibility of adjusting the row spacing. To ensure the reliability of the seeder and the accuracy of seeding, the seeder is equipped with a brush stop and a seed ejector. To establish even seeding, careful adjustment of each metering unit is required.

Preparing the drill for work

Set the required sowing rate, + +, by installing the required sowing sleeve on the shaft. Adjust the position of the brush seeding stop to the desired amount of seed. Check and, if necessary, adjust the seeding rate by rolling the planter with seeds on a level surface.

Sowing:

Before sowing, pre-mark the bed. Sowing is carried out in well-prepared soil in the usual way with row spacings + +, corresponding to the technology of sowing individual crops. After sowing, the soil is rolled up and + + if necessary + + mulched and watered. After work, clean the drill of soil and seed residues.

Country of origin - Ukraine.

Coulter type - Keel

Seeder type - Disc

Passage width -60.0 (mm)

Sowing depth -40.0 (mm)

Number of bunkers -7

Condition- New

dimensions

Length -650.0 (mm)

Width -250.0 (mm)

Height -250.0 (mm)

Weight -4.5 (kg)

FREE Priority Air Mail Shipping with Tracking Number