KVM-A8 Pcie Version for Raspberry Pi 4 Model B KVM over IP Support Pikvm V3 Poe ATX HDMI CSI (Not Include Raspberry Pi)

KVM-A8 Pcie Version for Raspberry Pi 4 Model B KVM over IP Support Pikvm V3 Poe ATX HDMI CSI (Not Include Raspberry Pi)

  • 【What is it】This kit allows user to realize a PiKVM / KVM project with Raspberry Pi 4 Model B which can control a computer using a web browser!
  • 【Compatiblity】for use with Raspberry Pi 4 Model B 8GB/4GB/2GB/1GB only (NOT support RPi 3); Only support OS version: PiKVM V3 platform, NOT support PiKVM V4.
  • 【Function】Remotely turn on/ turn off / restart your computer; configure configure the UEFI/BIOS; reinstall the OS using the Virtual CD-ROM or Flash Drive; remote use your keyboard and mouse; Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc.
  • 【How to Power】POE Power(Recommend, need a POE switch), or Power Inpur: 5.1Vdc +/-5% , ≥3A power via USB-C port of X630-A8 (Refer to Geekworm 5V 4A USB-C PSU ASIN:B09J856PND)
  • 【How to Cool】X630-A8 comes with an active cooling fan to cool down the Raspberry Pi 4
  • 【What Included】1 x X630 HDMI to CSI-2 Module, 1 x X630-A8 V1.7 Expansion Board, 1x X630-A8-CAB V1.1 Camera Adapter board and other accessories, refer to the packing list picture for details.
  • 【Extra Needed to Prepare】Raspberry Pi 4, TF card, power adapter (only requires it if you have no POE switch)
  • 【User Manual】Pls refer to Geekworm WiKi and search PiKVM-A8, use OS version: Raspberry Pi 4, v3 HAT platform:

Product Description

Note:

  1. The Raspberry Pi 4 is not included in the packing list.
  2. The X630-A1 plate has no use for the PiKVM-A8 installation, don't need to use X630-A1.

Overview

PiKVM is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!

This is the PiKVM-A8 PCIe version kit that allows user to realize a PiKVM / KVM project with Raspberry Pi 4. It is directly inserted into the computer case as a PCI card and does not require additional cables and is very convenient to use. That is, you can put a computer into your computer.

The PiKVM-A8 is composed of follow parts:

  • X630 HDMI to CSI-2 Module (for video capture)
  • X630-A8 V1.7 Expansion Board (for POE, RTC, ATX Control power in etc)

User Manual: Pls refer to Geekworm WiKi and search PiKVM-A8, Only support OS version:PiKVM V3 platform, NOT support PiKVM V4

Features

  • Designed especially for PiKVM ( Raspberry Pi 4-based KVM over IP)
  • Installs justs like any PCI card into a tower / desktop PC
  • Compatible with the latest Raspberry Pi 4 Model B(Not support Raspberry Pi 3)
  • Fully compatiblie with PiKVM OS (Only support OS version:PiKVM V3 platform, NOT support PiKVM V4)
  • Reliable remote network access to servers and computers
  • HDMI Full HD capture based on the TC358743 chip （from X630)
  • OTG Keyboard & mouse; Mass Storage Drive emulation
  • Hardware Real Time Clock (RTC) with CR1220 coin battery socket
  • Equipped with cooling fan on X630-A8 for heat dissipation of Raspberry Pi 4
  • Equipped with photocoupler to protect RPi GPIO pins from computer and ESD spikes
  • PoE Supported – Power over Ethernet for simplified installation, also supports for powering via USB-C of X630-A8
  • Designed to use a single Ethernet cable for both data and power transmission （POE)
  • Reserves the PH2.0-4P connector for I2C OLED display

Note about the OLED:

We have considered for a long time whether to put the OLED in the PiKVM-A8 kit, the OLED screen has no fixed installation position users need to find a way to mount the OLED himself, we are worry about this will lead to return, but we finally still decided to put the OLED screen in the packing list in consideration of some users will need to use the OLED screen. Please take this into consideration before make a decision.

The OLED is only used to display some information you need, you can also not use OLED!!!

Wiring Diagram

How to Power:

  1. PoE Supported – Power over Ethernet for simplified installation
  2. Also support to power via USB-C port of X630-A8

Packing List:

  • 1 x X630 HDMI to CSI-2 Module with Accessories
  • 1 x X630-A8 V1.7 Expansion Board
  • 1x X630-A8-CAB V1.1 Camera Adapter board
  • 1 x ATX Control Cable(52cm Length)
  • 1 x Motherboard Internal USB 2.0 9-pin Female header to TYPE-C USB OTG cable(50cm Length)
  • 1 x USB3.0 IDC to TYPE-C USB OTG Cable (45cm Length)
  • 1 x Standard height PCIe Add-in Card I/O Bracket
  • 1 x HDMI Cable(30cm length)
For Use With Raspberry Pi 4 Model B Only Raspberry Pi Zero 2W Only Raspberry Pi 4 Model B Only Raspberry Pi Compute Module 4(CM4)
With Case Yes No No, put into the PC directly No, put into the PC directly
Work with X630 Yes Yes Yes No
Supported OS PiKVM V3 platform Raspberry Pi Zero 2W, V2 platform PiKVM V3 platform PiKVM V3 platform

  • Item model number TB-2022-63
    Operating System PiKVM
    Item Dimensions LxWxH 4.72 x 3.54 x 0.79 inches
    Series PiKVM-A8
    Country of Origin China
    Item Weight 2.19 ounces
    Connectivity Technology USB, HDMI
    Model Name PiKVM-A8
    Product Dimensions 4.72 x 3.54 x 0.79 inches
    Included Components 1 x X630 HDMI to CSI-2 Module, 1 x X630-A8 V1.7 Expansion Board, 1x Other Accessories

Shipping

  • Fast shipping is very important for us.

  • Our standard US shipping service is FREE.

  • Your order will be shipped within 2-3 business days upon full payment received.

  • Your order will be delivered within 2-3 business days after the handling time.

  • We only ship to the confirmed PayPal address. We reserve the right to cancel any order for any reason at any time.

  • We are not responsible for undeliverable addresses.

Returns and payment

  • We offer a 30 days return policy from checkout winning date.

  • We allow only PayPal as payment method

FeedBack

  • Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback

  • If you have any problem with your order / any questions please before leave any type of feedback

For any questions, using eBay contact system 

Please visit our eBay store to check out other items for sale!

Thank you for shopping at our store.