honest-sal
Motorcycle Accessories
- Material: Flexible rubber
- Type: 2 part - Rubber pad with separate double sided adhesive (included)
- Height : 19.2 cm
- Width (Top) : 8.2 cm
- Width (Bottom): 5.2 cm
- Thickness : 4 mm approx.
Please use the measurements above to check fitment on your tank.
Adhesive is clear in colour & has very strong adhesion.
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Place the rubber pad on the tank, align it and mark with paper tape.
3. Peel white/yellow side of the adhesive and apply to the pad. Leave it for a few hours to bond.
4. Now peel the red side and attach to the tank.
Use a precision screw driver or something similar to find separation.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
Note 1: The separate adhesive provided is double sided. Please ensure you peel both sides.
Note 2: Do not apply on fresh paint.
Note 3: Use a heat gun or hair dryer incase you need to take the pad off.
- Please get in touch if you have any issues or questions.
- Don't just leave negative feedback as it won't solve the problem.
- Your satisfaction is my priority
- Material: Flexible rubber
- Type: 2 part - Rubber pad with separate double sided adhesive (included)
- Height : 19.2 cm
- Width (Top) : 8.2 cm
- Width (Bottom): 5.2 cm
- Thickness : 4 mm approx.
Please use the measurements above to check fitment on your tank.
Adhesive is clear in colour & has very strong adhesion.
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Place the rubber pad on the tank, align it and mark with paper tape.
3. Peel white/yellow side of the adhesive and apply to the pad. Leave it for a few hours to bond.
4. Now peel the red side and attach to the tank.
Use a precision screw driver or something similar to find separation.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
Note 1: The separate adhesive provided is double sided. Please ensure you peel both sides.
Note 2: Do not apply on fresh paint.
Note 3: Use a heat gun or hair dryer incase you need to take the pad off.
- Please get in touch if you have any issues or questions.
- Don't just leave negative feedback as it won't solve the problem.
- Your satisfaction is my priority