Rubber Motorcycle Tank Pad - Can be cut
Top Quality Flexi Rubber Motorcycle Tank Pad
Universal Fit
- Material: Flexible Rubber (can be cut to reduce height or make sections)
- Rubber pad with separate double-sided adhesive (included)
- Height: 19.2 cm
- Width: 8.2 cm (Top), 5.2cm (Bottom)
- Thickness: 3 mm
Please use the measurements provided to check fitment on your tank.
Installation Guide:
1. Clean the tank and the back of the rubber pad thoroughly from contamination. Use IPA cleaner or mild detergent solution.
2. Place the rubber pad on the tank, align it and mark with paper tape.
3. Peel white/yellow side of the adhesive and apply to the pad. Leave it for a few hours to bond.
4. Now peel the red side and attach the pad to the tank utilising the mark ups in step 2. Use a precision screwdriver or a pin to find separation.
5. Allow 24 hours for the adhesive to cure. Do not ride straight away.
- The separate adhesive provided is double sided & clear in colour. Please ensure you peel both sides.
- Do not apply on fresh paint.
- Apply at room temperature.
- Use a heat gun or hair dryer if you need to take the pad off.