Start, Master Battery, Lights, Avionics, and Flaps Panel for MSFS2020 Cessna C172 (Classic and G1000 variants). The panel sends 18 commands to control engine start (magnetoes), master bat, external lights, avionics master buses, and flaps control located at the bottom left of the main panel of the Cessna C172 (Classic and G1000 variants). The panel adds more realistic and immersive to your flight simulation experiences.
The panel is backlit using LED. The light can be switched on and off with a switch. It comes with 2-meter (6.5 feet) USB cable.
This is a ready-to-use hardware, a plug-and-play device with very little settings using a provided configuration file. It is a complete product that the buyer will not need to build a box our modify a support. It can be simply put on your desk. Unboxing, installing a software (MobiFlight), and complete a set up will take only 5-10 minutes.
The Installation video guide, and a panel control file will be provided once you complete your order.
The panel was designed for future expansion. Dimensions of the box are the same for this Exterior Lighting and Engine Start Panel, and all new control panels in the future. Four (4) of M3 thread at the back of the panel are for securing the panel to any support. Users can easily install them together, side-by-side or stacking. Your home cockpit will be thoughtfully grown functionally and aesthetically.
Dimensions: 2"H x 12" L x 1 1/4"D (or 1 3/4"D with height of switches), 50 mm. H x 300 mm. L x 30 mm. D (or 45 mm. D with height of switches). Weight: 0.5 kg. (or 1.1 lbs.)
The panel shall be re-tested before packing to make sure it works properly.
Note: There is no spring return at magnetos START to BOTH positions.