Intelligent Ultrasonic Flaw Detector NDT Testing With Compatible Win7 Win10
Introduction
We pursue the degree of portability in the field of industrial flaw detection, simplify the complex, the team work hard day and night to develop a new flaw detector, make the flaw detection more simple, convenient, to meet the increasingly updated needs of modern flaw detection.
Function
Small size ;
High level integration;
NDT material internal defects;
Plug and play, compatible Xp、Win7、win10;
Easy and flexible calibration;
Square wave pulse excitation, optimized electro-acoustic matching, more suitable for ultra-thick/ultra-thin workpiece detection;
Support full wave, positive wave, negative wave and radio frequency signal;
Support 80M-160M different sampling frequency;
Support single crystal, double crystal, transmission mode detection;
Support 1M-15M probes of different frequencies.
Battery:Work continuously for 5 hours
Highlight color screen, read under strong light, adjust screen brightness arbitrarily
Operation
Visual operation, simple operation
Text menu structure, quick and clear setting
Support a variety of standard probes
Products are widely used in pressure vessels, petrochemicals, aerospace, welding, railways, metallurgy, steel structures, electric power, boilers, nuclear industry, shipbuilding, aircraft manufacturing and automobile production.
Performance
Principle: Ultrasonic (Pulse-Echo/E-E)
Detection range: 10mm – 2000mm
Velocity: 100-9999m/s,Preset 26 common material sound velocities
Probe delay: 0-500us
Display delay: -199-200mm
Dynamic range: >36dB
Sensitivity: >64dB 200mm,2mm flat bottomed hole
Dimension(mm): 107×35×14mm
Weight: 0.05Kg
Working Environment: Temperature -10-60℃;Humidity 5%-60%
Testing method: Full wave/positive wave/negative wave/RF
Bandwidth frequency: 1.25/2.5/5/10/Wide frequency
Mean value: 1-100
Storage
A scan raw data
B scan imaging
USB storage: Save data via USB connected to U disk
Input-Output
Probe connect: C5
Connect: USB
Regional
Language: Chinese/English
Unit: mm/inch
Clock: Real time display date/time
Gate
Quantity: 3 independent gates (1 interface gate)
Follow the gate: Support gate 1 frame selection of boundary waves, gates 2 and 3 are always in the same position after boundary waves as follow-ups
Measured value display: The maximum peak amplitude, position (SA), depth (DA), horizontal distance (PA, RA (remove the leading edge of theprobe)) and the number of round trips in each gate.
Alarm: Alarm logic is set in each gate (positive(wave is higher than the gate)/negative(waveform is lower than gate)/close)
Quick operation
Full screen/lock screen/auto gain/freeze/envelope/device re-connection
Equivalent curve
DAC/TCG:5 curves
Standard:GB 11345、NB 47013
Standardize:10 non-sequential calibration points
DGS:Suitable for three reference types of large flat bottom/flat bottom hole/through hole, considering the reference attenuation, material attenuation and surface compensation factors, defect evaluation method: equivalent size/equivalent gain/percentage