https://www.youtube.com/watch?v=wDeoCkqCL2Y

Hormann Garador Type 868Mhz HSM4 Blue Button Garage Door Remote 

Hormann HSM2 868 ，HSM4 868

Hormann HS1 868，HS2 868，HS4 868

Hormann HSE2 868，HSE4 868

Hormann HSZ1 868，HSZ2 868

Hormann HSP4 868，HSP4-c 868

Hormann HSD2-A 868，HSD2-c 868

It is only compatible with the Hormann 868MHz blue button

Specifications:

Type of programming: self Copy

Number of channels: 4

Size: 60*30*12mm

Product material: ABS

Product weight: 40 g

Product color: Black + silver

Rated voltage: 12V 30A

Installation: wireless

Wireless transmission distance: 50-150 (m). (open space)

Frequency: 868MHz, 868.3MHz

Usage: Fifteen seconds clone, can be used directly after cloning

Features:

1.Privacy is strong

2.One to one key copy

3.Each key password alone save

4.Can continuous repetitive copy use one million times

­­HHow to program Cloning is completed in 10 seconds and can be used directly after cloning

 

Hormann Garador 868Mhz HSM4 Blue Buttons Programming

 

Face to face copy your original remote control

Step: 1: Clear the history code from duplicator

1: Press button 4 and 2 continuously until LED flash 3 times

2. Release button 2 (Keep pressing button 4), and press button 2 Slowly for 3 times, LED flash

3. Release button A, finish code clearance.

Step 2, Copy code from original transmitter 

1. Put duplicator aside of original transmitter, as close as possible.

2. Press and hold button A of original transmitter, then press and hold button A of duplicator until you see the duplicator is LED flash

3. Release both buttons, finish code copy, copy other button in same way.
Button A= Lock button
Button B=Unlock button

This is a clone remote, please make sure your original remote works for easy programming.

If you still need help, please see Youtube for ‘How to programme Hormann Remote 868 Mhz “

 

You should also be able to copy directly from the operator itself.

 If you press the ‘L’ Button on the operator a light will ‘blink’

then press the button on the remote you want to use., both lights will ‘blink’

Your new remote is ready to use!

(The ‘L’ button can be found on the rear of the operator)