Wallrock Thermal Adhesive Ready Mixed 5kg

Thermal Liner Adhesive is a specialist adhesive formulated for interior energy saving wallcoverings and wall repair systems, powered by Wallrock.

2.5kg of adhesive is normally required per roll for insulating wallpapers

Thermal Liner Adhesive is suitable for the following products:

Thermal Liner KV600

Thermal Liner

Cosy Liner KV300

PUR Sound Insulation

Insulating Lining Paper

Insulating Lining Graphite+

Heatsaver Lining

High performance aqueous adhesive with fillers

Thick, smooth, low splatter formula - roll or brush straight from the tub

High wet tack to hold while cutting and positioning

High resin content for optimum adhesion to surface

Allows walls to breathe and resists moisture

Contains an inhibitor to prevent mould, yeast and fungal growth

Thermal Liner Adhesive can be used on most internal wall surfaces. The adhesive contains filler and can be used in conjunction with our wallcovering products to cover surface imperfections and textures. All surfaces should be firm, dry and clean, all loose material should be removed before the adhesive is applied. Major surface imperfections should also be filled and levelled in preparation. Drywall and other absorbent surfaces should be sized and completely left to dry for at least 4 hours before application of the adhesive.

Buy in confidence from one of Ebays largest wallpaper suppliers!

Thanks for looking and feel free to message through Ebay if you have any questions