Shaped, inlaid, fretted and finished—feels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.
Other features include:
The frets are nicely finished.
The string nut is slotted and shaped from PPS plastic with a flat bottom.
Maple fretboard with dot inlays and side markers.
Screwholes for attaching to the body are not drilled.
Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief).
Peghead is drilled for 4-in-line tuning machines, with 23/32"-diameter pegholes.
Specifications —
Scale length: 34" (863.60mm)
Width at nut: 1-5/8" (41.28mm)
Width at 20th fret: 2-1/2" (63.50mm)
Fretwire: .042" high x .105" wide (1.07mm x 2.67mm)
Fret count: 20
Fretboard radius: 9-1/2" (241.30mm)
Fits neck pockets measuring 5/8" (15.88mm) deep x 3-7/8" (98.43mm) long x 2-1/2" (63.50mm) wide
Neck thickness (approximate; not including fret):
.850" (21.59mm) at the 1st fret
.880" (22.35mm) at the 6th fret
.945" (24.00mm) at the 12th fret