RC 4axle Multi QuadCopter UFO RTF/ARF:KK V2.3 Circuit board+1000KV Motor+30A ESC+Lipo+F450 Flamewheel+6ch TX&RX
HJ 450 450F Nylon Fiber Flamewheel Frame Airframe kit
Fetures:
by advanced engineering material,super
strong & smooth.
High quality and strong ability of
anti-fall, lower maintenance cost.
Compact design with small numbers of
components, you can assemble it by youself quickly and
easily.
Suitable for both beginners and senior
Excellent quad-copter
products.
- Support KK MWC by new disign PCB board(Not Included)
Speicifications:
Color: Red + White + Black
Shaft distance: 17.7in/450mm
- Net weight: 0.65lb/282g - by advanced
engineering material,super strong & smooth
- Kit(need you assemble yourself)
KKMulticopter v5.5 Circuit board V2.3
1. Simple structure, Easy
to Maintain and Debug Control
2. Relying on
potentiometer adjust gyro sensitivity.
3. Full servo signal
output, support normal ESC / analog servo
4. Support for single-axle
/ UFO, Y3 3-axle, Y4-type 3-axle, 4 axle, 6 axle, V22 flight
mode
5. Supports 4-axle "+" and
"X" flight mode, support for six-axle "HEXA6" and "Y6" flight
mode.
FlyCam MultiCopter
Controller Blackboard(kkMultiCopter)
A 2212 A2212 1000KV Brushless
Outrunner Motor W/ Mount *4pcs
KV: 1000
Max Efficiency: 80%
Max Efficiency Current: 4-10A
(>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: ?27.5 x 30mm
Shaft Diameter: ?3.17mm
Weight: 47g/set
Including: 1
set 2212 1000KV Brushless Outrunner Motor with Mounts *4
FMT 30A ESC Speed Controller *4 pcs
This ESC do not have the English instruction.
Before producing, the manufacturer have set up the program, the ESC do not need additional program.
JMT 30A Brushless ESC Speed Controller For RC RC Quadcopter Hexacopter Multi-Rotor Aircraft
1. quantity:1PCS
2. 100% Brand New!
3. No manual.
4. For KK MK MWC RC Quadcopter Hexacopter Multi-Rotor Aircraft
5. Preview:
1 Specification
1.1 Output: Continuous 25A, Burst 40A up to 10 Secs.
1.2 Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
1.3 BEC: 3A
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM,
35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
1.5 Size: 45mm (L) * 25mm (W) * 11mm (H).
1.6 Weight: about 25g.
2 Features
2.1 Safety Arming Feature: Regardless the throttle stick position, the
motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best
throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items: Brake Setting: brake enabled / brake
disabled. Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the
output power / Cutoff the output power. Low Voltage Cutoff Protection
Threshold (Cutoff Threshold): low / medium / high. Start Mode:
normal / soft / very soft. Timing: low / medium / high. Reset:
reset all the programmable items to their default settings.
2.4 Full Protection Features: Low voltage cutoff protection / Over-heat
protection / Throttle signal lost protection.
3 Advantages
3.1 Military standard capacitor of extreme low resistance increases the
ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current
endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-
jamming capability.
11.1V 20C 2200Mah Lipo Battery *1 pcs
Specification:
Output:11.1V(3S1P)2200mAh
Weight
About:193g
This Li-poly
battery features high efficient and high discharge,use a inspection machine to match packs, suitable for All Align trex 450
rc heli and other professional model
airplanes, cars, and guns.
Max
Continuous Discharge: 10C, Burst Discharge: 15C. Normal operating temperature is
approx. 40-65°C(within 80% of rated
discharge). Max. temperature: 80°C.
NOTE:
When using
high energy Li-poly Battery, please do not over-discharge, over-charge
batteries, or result over-high temperature. Discharging
capacity can't exceed 80% of the max capacity after full
charging to ensure a good cycle performance. Recommend to full
charge
a brand new battery before using and only discharge the battery 50% for first 5
times
to make a good efficiency of the battery. Please make it a habit to always count
time
for flight, or please set a low voltage protection on ESC (Cell voltage after
stopping using can not lower than 3.2V). Do not use the
battery at insufficient of voltage.
Do not expose batteries to sunshine or store/ charge
batteries at the temperature up to 35°C in a airtight car.
The environment high temperature could cause the damage or the
danger
of burst. If the battery becomes hot while high current discharging or
flying,
please do not charge the battery immediately. Wait to
cool down(about 20 mins), then inspect to recharge. If against follow the original
factory using rules, possibly cause the battery to inflate or
any dangerous accident happens.
Tarot 1045 5mm
Efficient/Hardness Blade Propeller TL2710-01/TL2710-03 (2 pairs)
(For the color of propeller,we will ship random color according to our invertory)
Digital 2.4GHz 6-Channel RC
system T6EHP adopted FHSS 2.4GHz technology, it is applied for 3D helicopter.
Owing to the most advanced 2.4GHz radio control technology, it is needless to
fit crystals for both transmitter and receiver, meanwhile RC system can avoid
the interaction problem best up to the advanced code matching
mechanism.
Standard Programming
Functions :
Model Select six model
memory.
Model Type helicopter programming. (for airplane is another
version)
Servo Reversing on all six channels.
Dual Rate/Exponential for
ailerons, elevator and rudder.
End Point Adjustment fine-tunes servo throws
on all six channels.
Digital Trim stores trim settings for each model for
aileron, elevator, rudder and throttle.
Fail Safe a safety throttle setting
in case of loss of transmitter signal.
Battery Fail Safe moves the throttle
to a preset position when the airborne pack reaches 3.8V.
Stick Mode choose
from Mode 1 through 4.
Range Checking Power Down reduces transmitter output
power for up to one minute, allowing range checking from 50 paces away.
Changeable Throttle Stick select ratchet for airplanes or smooth for helis.
Adjustable Stick Length choose the length that suits your flying style.
Helicopter-Specific
Programming Functions:
5-Point Normal and Idle Up
Throttle/Pitch Curves.
Throttle Hold for autorotation.
Revo (Revolution
Mixing) mixes rudder and pitch together.
Gyro Mixing two gyro gain settings
can be programmed and selected during flight.
Swash to Throttle Mixing
corrects slowing of the engine's speed caused by the swashplate.
Swashplate
Types choose from 1S (independent aileron, pitch and elevator servos linked to
the swashplate), 3S (120° CCPM), or 3E (90° CCPM).
Swash AFR Adjustable
Function Rate, for use with 1S, 3S or 3E swash
types
(Please pay attention this:
The Radio Controller Software upgraded,The wire connecting for Receiver and KKMulticopter board has been changed.Please check and like this:)
(assembly required buyers)
F02192-A RC 4axle Multi QuadCopter UFO RTF/ARF:
HJ 450 450F Nylon Fiber Flamewheel Frame *1
A2212 1000KV Motor installed
base*4
JMT 25A ESC*4
V2.3 Circuit board*1
1045 Propeller*2 pair
JMT 11.1V 2200mah 20c lipo battery *1
Relate wire
Charger+adapter * 1 set
Radiolink T6EHP-E 2.4G 6Ch Transmitter and Receiver*1