|
Intelligent Control Panel Design | Ultrasonic Cleaning Tech | Multiple Test Functions |
To deliver premium user experiences and make it more efficient to use, AUTOOL CT180 Fuel injector cleaner and Tester is designed with Touch Screen and Rotary Knob. With large 4.4-inch screen display, it is easy to observe various working parameters. | The AUTOOL CT180 intelligent injector cleaner and tester is equipped with a separate ultrasonic cleaning tank. The vibration signal generated by ultrasonic waves is applied to powerfully clean the surface and interior of the fuel injectors, so as to completely removing stubborn carbon buildup from the fuel injectors. | It can carry out Sprayability test, Leakage test, Injecting Flow test, Automatic test and many other testing functions. A variety of test parameters can be set to simulate injector testing under various operating conditions. |
Backlight Design & Level Gauge The glass tube can be observed through the level gauge during the test, so that the injector flow can be determined whether the flow is normal. At the same time, the backlight can assist in making the observation more carefully. | Three Years Warranty, Lifetime Maintenance: For damage caused by non-human factors, AUTOOL promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. |
01. Ultrasonic cleaning: It can clean several injectors at the same time and completely remove carbon deposits from the injectors. 02: Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. 03: Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. 04: Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. 05: Automatic test: To test injectors by simulating different working conditions. 06: No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters. 07. Settings: The Settings interface is used to set the default values whenever the device is started. |
Specifications: Main unit power supply: AC220V±10%, 50/60Hz. Main unit power: 150W Dimension of main unit: 27cm x 31 cm x 34cm Ultrasonic cleaner power: 60W; Fuel pressure:0-10bar Simulated RPM range: 20~10000rpm; Pulse width: 0.5~25ms; step 0.1 ms; Uniformity/Sprayability test duration: 1~20min Leakage test duration: 1~30min Injecting flow test duration: 3~120s Automatic drain: 60s Pressure unit: Bar, Psi, Kpa, mmHg, Kg/cm2 Dimension: 305x310x340mm Weight: 8.8kg (Varies according to configuration) | Working conditions: Functions |
Packing list: 1pc* AUTOOL CT180 Intelligent Fuel injector cleaner and Tester Main unit 1pc* Ultrasonic cleaning tank 1pc* Testing pad 1pc* Ultrasonic leaning stand 4pcs* Connector 1 (H19*25*10.5) 4pcs* Connector 2 (H19*25*13.5) 4pcs*Fine-tooth joint(H19*25*M12) 4pcs*Coarse joint(H19*25*G1/4-19) 3pcs*Plug (25*40*16.2) 4pcs*Reverse joint(25*40*16.2) 2pcs*Adjusting stud (M10*78) 2pcs*Compression screw(18*100*M10) 2pcs*Knurled nut(18*30*M10) 1pc* 4-oil separator(28*16*213) 1pc*Funnel (58*50*8.0) 1pc* Wrench for Oil draining(24*56*5) 20pcs* Sealing ring 7*2.65 4pcs*Seal ring 15.6*2.65 2pcs* power cables (EU US standard) 2pcs* Pulse signal lines |