 |  |  |
Wide Range of Applications For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models. | Powerful and Easy to Operate 1.Fill 10ml test oil to the detector. 2.Disconnect the pipe that needs to be connected with detector. 3.Connect detector with DC12V battery, device starts to work. 4.The pipe will be filled with smoke.Check the leak points. | Advanced Technology It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flow meters for accurate data display & Independently controlled Air mode and Smoke mode. |
 |  |  |
| Quick leak diagnosis by pressure display No leaks: if the value of the pressure gauge remains the same, it means there is no leak in the pipeline system. Small leak: if the value of the pressure gauge drops a bit, it indicates a small leak in the pipeline system. Serious leak: if the pressure gauge reaches zero, it indicates a large leak in the pipeline system. | Dual test modes: no need to buy additional air compressor Air mode: Turning on the air mode allows you to determine if there is a leak in the pipe by introducing air into the pipeline, there is no need to purchase additional air compressors or air pumps, making your diagnostics easy and cost-effective. Smoke Mode: After determining that there is a leak in a pipe, turning on Smoke Mode can help you quickly locate the leak. Smoke can be generated within 5s, greatly reducing diagnostic time. | Visual level gauge and handy drain outlet The level gauge allows you to accurately control the amount of test oil, while the drain outlet allows for easy recovery of the test oil. |
 |  |  |
| Dual Test Modes Air mode: It is possible to diagnose leaks through the pressure gauge without no smoke required. It is provided with a flow meter set from 1 to 6 levels to adjust the airflow and thus accurately measure tiny leaks (even up to 0.25 mm). Smoke mode: This mode can be used when a leak is detected. This smoke detector can produce smoke within 10 seconds to help you find pipe leaks quickly and accurately. | Visual flow meter & adjustable knob Smoke output flow: 0-6 L/min, level gauge with an adjustable knob, easy to observe and operate. | Advanced Technology It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flow meters for accurate data display & Independently controlled Air mode and Smoke mode. |
 |  |  |
| Overheat & Anti-frost Protection This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device. | Quick leak diagnosis by pressure display No leaks: if the value of the pressure gauge remains the same, it means there is no leak in the pipeline system. Small leak: if the value of the pressure gauge drops a bit, it indicates a small leak in the pipeline system. Serious leak: if the pressure gauge reaches zero, it indicates a large leak in the pipeline system. | WIDE RANGE OF APPLICATION For detecting the leakage of pipe systems on cars, motor- cycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats. With flowmeter display, suitable for All Autos |
 |  |  |
| Dual Test Modes AUTOOL SDT205 EVAP Smoke Leak Detector has dual test modes, including Air mode and Smoke mode. Air mode: it is possible to diagnose whether there is a leak through the pressure gauge without output smoke. Smoke mode: equipped with an independently controlled smoke generator. This mode can be activated in case a leak is found, enabling you to locate the leak precisely. | Wide Range of Applications For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models. | Built-in air pump saves time and money You’ll have to buy an air compressor in addition to the detector in most cases to be able to test your vehicles for leakages, AUTOOL SDT205 car fuel leak detector already has that feature built-in. So you’re saving some extra money! |
 |  |  |
| Quick leak diagnosis by pressure display No leaks: if the value of the pressure gauge remains the same, it means there is no leak in the pipeline system. Small leak: if the value of the pressure gauge drops a bit, it indicates a small leak in the pipeline system. Serious leak: if the pressure gauge reaches zero, it indicates a large leak in the pipeline system. | Safety This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device. | Independently Switch Design It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flowmeters for accurate data display & Independently controlled Air mode and Smoke mode. |
 |  |  |
| Small Size Design Most smoking machines are bulky and heavy, which is not conducive to the transportation and storage of the equipment. AUTOOL SDT103 weights only 1.7kg. It is small and light, not only for easy storage, but also for ease of use. | Overheat & anti-frost protection Built-in intelligent protection device, if it exceeds the working limit,such as 75℃ it will automatically turn off the power to ensure the safety of the operator and the equipment. | Special detection for EVAP The sdt103 can be used by connecting an external air source and a 12V battery.It is designed with a built-in pressure controller to fix the output pressure at 3.2Kpa (0.46psi), which is especially for EVAP system testing to prevent EVAP Pipes from being damaged by excessive pressure. |
 |  |  |
| Smoke flow can be Adjusted Equipped with airflow meter to observe the current airflow volume. And the airflow regulator to better control the smoke effect.It can be outputs lots of Smoke within 30 seconds after turning on. | Wide range of applications For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.Works on all car makes and models. | PORTABLE DESIGN This device has a 90 degree rotating handle for easy storage in the workshop. |
 | ||
 |  |  |
| Wide range of applications For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.Works on all car makes and models. | Powerful and easy to operate The AUTOOL SDT 106 has its own air pump, it does not rely on other air machine ,Connect the detector with DC12V battery,It can be outputs lots of Smoke within 30 seconds after turning on. | Overheat & Anti-frost protection The detector has smart protector. If it exceeds working limit,for e.g over 75℃. It will power off automatically. |
 |  |  |
Built-in air pump No need to buy an extra air compressor or air pump, which can save your money. | How to do a leak test? 1.Fill 20ml test oil to the detector. 2.Disconnect the pipe that needs to be connected with detector. 3.Connect detector with DC12V battery, device starts to work. 4.The pipe will be filled with smoke.Check the leak points. | Advanced technology It works on the EVAP system (we also have another version that specially designed for EVAP system). |
 |
 |  |  |
Fast smoke output plenty of smoke outputs within 10s, which greatly shortens the diagnosis time and improves the working efficiency. | Wide range of applicationsSuitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault. | Built-in air pump No need to buy an extra air compressor or air pump, which can save your money. |
 |  |  |
Overheat & anti-frost protection This smoke detector is equipped with the latest intelligent protection device. When the temperature of the device exceeds 75 degrees Celsius, the power protection device will be intelligently activated to turn it off, to ensure the safety of the operator and the device. The device is also suitable for low temperature operation | How to do leakage test? 2.Disconnect the pipe that needs to be connected with detector. 3.Connect detector with DC12V battery, device starts to work. 4.The pipe will be filled with smoke.Check the leak points. | Quick leak diagnosis by pressure display. Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system. Massive Leak: When the value of the pressure gauge reaches zero, it indicates a large leak in the system. |
 |  |  |  |
 |  |  |  |
 |  |  |  |
