Doremi X-DVI-20s DVI & SDI cross converter + remote

nicely working

safe shipping

XDVI-20s The XDVI is a powerful compact cross-converter for DVI, HD-SDI and SDI video. Any input can be converted to any output or scan rate. Applications for the XDVI include computer to video scan conversion, HD video up-conversion / down-conversion and much more. The analog VGA format is also supported via the DVI-I input. Key Features:  Control Software: The control  software for the XDVI converter  provides all the functions accessible  via the IR remote. The software also  features a downloadable look up table  (LUT).  Downloadable Look Up Table (LUT):  Available from the XDVI control  software. Preset LUT are also included  such as a reverse LUT for the Viper  Filmstream  camera.  Infrared Remote: Full function infrared  remote controls the XDVI’s on-screen  display (OSD). DVI, HD-SDI and SDI Video Cross-converter


INPUT .......................................................................................................................   DVI-D (via DVI-I connector)  Analog RGB-HV (via DVI-I connector)     Requires a RGB to DVI-I breakout cable. Not included  DVI and Analog RGB-HV requirements:     – Interlaced and Progressive Sources up to 1920 x 1200     – Pixel clock must not exceed 165 MHz OUTPUT .......................................................................................................................   SDI—SMPTE 259M-C (270Mb/s)  HD-SDI—SMPTE 292M (1.485, 1.485/1.001 Gb/s) SUPPORTED SDI OUTPUT RESOLUTIONS .......................................................................................................................   NTSC, PAL  720p 50, 59 & 60Hz  1080i / 1080p  23.98, 24, 25, 29.97 & 30Hz INTERFACE .......................................................................................................................   On-Screen Display (OSD) with infrared remote control OTHER .......................................................................................................................   RS-422 for remote control and firmware upgrades GENERAL .......................................................................................................................   5 volts (screw-on connector)  External Adapter: 100–240VAC 50–60Hz  5.4” x 3.7” x 1” (138mm x 93mm x 24mm)