• What is a fuel injector?
  • A fuel injector is a device for atomizing and injecting fuel into an internal combustion engine. It's consistently under pressure.
  •  
  • Symptoms you require fuel injector replacement
    • Check Engine Light is illuminated;
    • The engine runs rough or there’s a dead miss in a cylinder;
    • There’s a raw fuel smell from the engine or the exhaust.
  •  
  • How to Replace Fuel Injectors?
  • Tips to remember
  • Fuel Injectors For Dodge Nitro 2007-2011 Chrysler Town & Country 4.0L 2008-2011

    What is a fuel injector?

    A fuel injector is a device for atomizing and injecting fuel into an internal combustion engine. It's consistently under pressure.

     

    Symptoms you require fuel injector replacement

    • Check Engine Light is illuminated;
    • The engine runs rough or there’s a dead miss in a cylinder;
    • There’s a raw fuel smell from the engine or the exhaust.

     

    How to Replace Fuel Injectors?

    Tips to remember

    It is advisable that when you plan to change the fuel injectors, change them all. Do not change just the ones that are malfunctioning. Pairing brand new injectors with old ones could cause inconsistent performance and a less than satisfactory driving experience. 

    WHAT YOU'LL NEED

    • Replacement fuel injectors
    • Fuel injector seals
    • Ratchet & socket set
    • Flathead screwdriver
    • Pliers
    • Towels

    STEP:

    1. The metal rod over the fuel injectors is the fuel rail. Use the socket and ratchet to remove the bolts and brackets holding the fuel rail in place. Depending on the model, some engines will need the fuel line disconnected from the fuel rail in order to move the rail.

    PRO TIP: This step usually depressurizes the fuel system in multi-port fuel injected vehicles, but your engine may vary. Check your repair manual to be sure.

    2. Make sure the engine is cold enough to touch. Disconnect the battery.

    3. Remove plastic engine covers using appropriate socket. Set covers aside.

     

    4. Use pliers to disconnect the electrical connector on each injector.

    5. Lift the fuel rail off of the intake manifold, bringing the injectors with it. This takes a good amount of force, as the injectors are attached to the rail, and the sprayer tips are a snug fit in the intake manifold. Don't use so much force, though, that you deform or bend the fuel rail. Pulling straight up (as the injector is oriented) makes for easier removal.

     

    6. Examine the injector. If you see a small metal clip that looks like a staple, use a small flathead screwdriver to remove or depress the clip. Grasp the injector and work back and forth while pulling to remove from the fuel rail. The injector and rail will drip, so have shop towels ready.

    PRO TIP: Before installing the new fuel injectors, dip the fuel injector tip (sprayer end) into a small amount of engine oil. This will wet the seals, preventing leaks. 

     

    7. Press the injector into the rail until it stops. Attach the metal clip, if equipped.

    8. Reattach the fuel rail. Line up all the injectors over their respective holes, then press each injector until they slide into place.

     

    9. Bolt down fuel rail. Reattach fuel line. Plug in fuel injector electrical connections.

    10. Reconnect battery.

    11. Turn the key to the on position and wait 10 seconds before turning to engine start. This will allow the fuel pump to refill the lines and fuel rails before the engine cranks.

    12. After the engine drops to the normal idle RPM, turn the engine off. Take a flashlight and check all the injectors for fuel leaks.

     

    How important is replacing your fuel Injectors?

    A leaking or plugged fuel injector causes the related cylinder to run rich or lean, both of which can cause long-term problems that require extensive repairs.

    In addition, your car’s performance will suffer and your Check Engine light will remain on until the repair is performed.

     

    Is there a break-in period with my new fuel injectors?

    Yes & No. All of our fuel injectors are ready to operate upon installation.

    Starting the engine and letting it idle for a minimum of 20 minutes is the best thing to do after installing new injectors. This will push the aerated fuel out of the injector nozzle. Failure to do this may create a low/no-fuel condition, which could cause internal damage to the injectors. The new fuel injectors will perform great initially, and you will continue to see increased performance up to 1000-3000 miles as the injectors continue to break-in.

     

    Can you upgrade fuel injectors?

    Yes, a fuel injector upgrade is a great option to help add miles-per-gallon or restore lost power and torque in older or high-mileage engines. The first thing to know is "upgrading" does not mean changing the injector flow-rate. Upgrading means replacing old, worn, OEM fuel injectors with a new set of fuel injectors. This upgrade can improve the overall performance of an older engine.

     

    There are 2 types of fuel injectors:

    1. Diesel Fuel Injectors

    Modern diesel fuel injectors are used to atomize and inject or spray diesel (which is heavier fuel than gasoline) directly into the combustion chamber of the diesel engine for compression ignition (no spark plugs).

    Diesel fuel injectors require much higher injection pressure (up to 30,000 psi) than gasoline injectors as diesel is heavier than gasoline, and it takes much higher pressure to atomize the fuel.

    2. Gasoline Fuel Injectors

    Gasoline fuel injectors are used to inject or spray gasoline directly (GDI) or through intake manifold (multi-port) or throttle body into the combustion chamber for combustion which is ignited by spark.

    The design of gasoline injectors varies by type… the newer GDI injectors use a multi holed nozzle, the multi-port and throttle body use a pointless style nozzle. Gasoline injection pressures are much lower than Diesel…3000 psi for GDI and 35 psi for Pinter style.

     

    Clogged Fuel Injectors

    It is not easy to diagnose a fuel injector as the symptoms it causes can be like a bad spark plug or ignition coil, meaning, one of the cylinders is not firing. If it is related to a clogged fuel injector it is due to old fuel being run through the engine, resulting in residue getting stuck inside the injector or its filter basket. If a fuel injector becomes fully clogged it will have to be removed from the vehicle and be professionally cleaned, as additives and fuel tank introduced injection cleaners will not be able to clear the clog, as they cannot pass through at all.

     

    Leaking Fuel Injectors

    This can be an extremely dangerous situation. If the fuel injectors are leaking externally, you should not drive your vehicle. While a leaking injector will cause issues like that of a dirty one, you will often be able to smell gas or diesel under the hood or even spot a leak, depending on your make and model. Externally leaking injectors pose a fire risk and need to be completely replaced.

     

    Fits Applications

    Chrysler 300 2.7L 2005-2010
    Chrysler 300 3.5L 2005-2010
    Chrysler Pacifica 3.5L 2005-2006
    Chrysler Pacifica 4.0L 2007-2008
    Chrysler Sebring 2.7L 2004-2010
    Chrysler Sebring 3.5L 2007-2010
    Chrysler Town & Country 4.0L 2008-2010
    Dodge Avenger 2.7L 2008-2010
    Dodge Avenger 3.5L 2008-2010
    Dodge Challenger 3.5L 2010
    Dodge Charger 2.7L 2006-2009
    Dodge Charger 3.5L 2007-2010
    Dodge Charger 5.7L 2008 
    Dodge Grand Caravan 4.0L 2008-2010
    Dodge Journey 3.5L 2009-2010
    Dodge Magnum 2.7L 2005-2008
    Dodge Magnum 3.5L 2005-2008
    Dodge Nitro 4.0L 2007-2011
    Dodge Stratus 2.7L 2004-2006



    content_src_url

    Fuel Injectors For Dodge Nitro 2007-2011 Chrysler Town & Country 4.0L 2008-2011

    What is a fuel injector?

    A fuel injector is a device for atomizing and injecting fuel into an internal combustion engine. It's consistently under pressure.

     

    Symptoms you require fuel injector replacement

    • Check Engine Light is illuminated;
    • The engine runs rough or there’s a dead miss in a cylinder;
    • There’s a raw fuel smell from the engine or the exhaust.

     

    How to Replace Fuel Injectors?

    Tips to remember

    It is advisable that when you plan to change the fuel injectors, change them all. Do not change just the ones that are malfunctioning. Pairing brand new injectors with old ones could cause inconsistent performance and a less than satisfactory driving experience. 

    WHAT YOU'LL NEED

    • Replacement fuel injectors
    • Fuel injector seals
    • Ratchet & socket set
    • Flathead screwdriver
    • Pliers
    • Towels

    STEP:

    1. The metal rod over the fuel injectors is the fuel rail. Use the socket and ratchet to remove the bolts and brackets holding the fuel rail in place. Depending on the model, some engines will need the fuel line disconnected from the fuel rail in order to move the rail.

    PRO TIP: This step usually depressurizes the fuel system in multi-port fuel injected vehicles, but your engine may vary. Check your repair manual to be sure.

    2. Make sure the engine is cold enough to touch. Disconnect the battery.

    3. Remove plastic engine covers using appropriate socket. Set covers aside.

     

    4. Use pliers to disconnect the electrical connector on each injector.

    5. Lift the fuel rail off of the intake manifold, bringing the injectors with it. This takes a good amount of force, as the injectors are attached to the rail, and the sprayer tips are a snug fit in the intake manifold. Don't use so much force, though, that you deform or bend the fuel rail. Pulling straight up (as the injector is oriented) makes for easier removal.

     

    6. Examine the injector. If you see a small metal clip that looks like a staple, use a small flathead screwdriver to remove or depress the clip. Grasp the injector and work back and forth while pulling to remove from the fuel rail. The injector and rail will drip, so have shop towels ready.

    PRO TIP: Before installing the new fuel injectors, dip the fuel injector tip (sprayer end) into a small amount of engine oil. This will wet the seals, preventing leaks. 

     

    7. Press the injector into the rail until it stops. Attach the metal clip, if equipped.

    8. Reattach the fuel rail. Line up all the injectors over their respective holes, then press each injector until they slide into place.

     

    9. Bolt down fuel rail. Reattach fuel line. Plug in fuel injector electrical connections.

    10. Reconnect battery.

    11. Turn the key to the on position and wait 10 seconds before turning to engine start. This will allow the fuel pump to refill the lines and fuel rails before the engine cranks.

    12. After the engine drops to the normal idle RPM, turn the engine off. Take a flashlight and check all the injectors for fuel leaks.

     

    How important is replacing your fuel Injectors?

    A leaking or plugged fuel injector causes the related cylinder to run rich or lean, both of which can cause long-term problems that require extensive repairs.

    In addition, your car’s performance will suffer and your Check Engine light will remain on until the repair is performed.

     

    Is there a break-in period with my new fuel injectors?

    Yes & No. All of our fuel injectors are ready to operate upon installation.

    Starting the engine and letting it idle for a minimum of 20 minutes is the best thing to do after installing new injectors. This will push the aerated fuel out of the injector nozzle. Failure to do this may create a low/no-fuel condition, which could cause internal damage to the injectors. The new fuel injectors will perform great initially, and you will continue to see increased performance up to 1000-3000 miles as the injectors continue to break-in.

     

    Can you upgrade fuel injectors?

    Yes, a fuel injector upgrade is a great option to help add miles-per-gallon or restore lost power and torque in older or high-mileage engines. The first thing to know is "upgrading" does not mean changing the injector flow-rate. Upgrading means replacing old, worn, OEM fuel injectors with a new set of fuel injectors. This upgrade can improve the overall performance of an older engine.

     

    There are 2 types of fuel injectors:

    1. Diesel Fuel Injectors

    Modern diesel fuel injectors are used to atomize and inject or spray diesel (which is heavier fuel than gasoline) directly into the combustion chamber of the diesel engine for compression ignition (no spark plugs).

    Diesel fuel injectors require much higher injection pressure (up to 30,000 psi) than gasoline injectors as diesel is heavier than gasoline, and it takes much higher pressure to atomize the fuel.

    2. Gasoline Fuel Injectors

    Gasoline fuel injectors are used to inject or spray gasoline directly (GDI) or through intake manifold (multi-port) or throttle body into the combustion chamber for combustion which is ignited by spark.

    The design of gasoline injectors varies by type… the newer GDI injectors use a multi holed nozzle, the multi-port and throttle body use a pointless style nozzle. Gasoline injection pressures are much lower than Diesel…3000 psi for GDI and 35 psi for Pinter style.

     

    Clogged Fuel Injectors

    It is not easy to diagnose a fuel injector as the symptoms it causes can be like a bad spark plug or ignition coil, meaning, one of the cylinders is not firing. If it is related to a clogged fuel injector it is due to old fuel being run through the engine, resulting in residue getting stuck inside the injector or its filter basket. If a fuel injector becomes fully clogged it will have to be removed from the vehicle and be professionally cleaned, as additives and fuel tank introduced injection cleaners will not be able to clear the clog, as they cannot pass through at all.

     

    Leaking Fuel Injectors

    This can be an extremely dangerous situation. If the fuel injectors are leaking externally, you should not drive your vehicle. While a leaking injector will cause issues like that of a dirty one, you will often be able to smell gas or diesel under the hood or even spot a leak, depending on your make and model. Externally leaking injectors pose a fire risk and need to be completely replaced.

     

    Fits Applications

    Chrysler 300 2.7L 2005-2010
    Chrysler 300 3.5L 2005-2010
    Chrysler Pacifica 3.5L 2005-2006
    Chrysler Pacifica 4.0L 2007-2008
    Chrysler Sebring 2.7L 2004-2010
    Chrysler Sebring 3.5L 2007-2010
    Chrysler Town & Country 4.0L 2008-2010
    Dodge Avenger 2.7L 2008-2010
    Dodge Avenger 3.5L 2008-2010
    Dodge Challenger 3.5L 2010
    Dodge Charger 2.7L 2006-2009
    Dodge Charger 3.5L 2007-2010
    Dodge Charger 5.7L 2008 
    Dodge Grand Caravan 4.0L 2008-2010
    Dodge Journey 3.5L 2009-2010
    Dodge Magnum 2.7L 2005-2008
    Dodge Magnum 3.5L 2005-2008
    Dodge Nitro 4.0L 2007-2011
    Dodge Stratus 2.7L 2004-2006



    Item Specifics
    Brand scitoo
    Manufacturer Warranty 1Year
    Manufacturer Part Number CB10531301S
    Type Fuel Injector
    Vintage Car Part NO
    Connector Color As Shown in the Picture
    Connector Type Gasoline
    Universal Fitment Yes
    Injector Design Metal & composite plastic
    Bundle Listing No
    Fitment Type Direct Replacement
    OE/OEM Part Number 0280158028 ,04591986AA,FJ612
    Placement on Vehicle Front
    Superseded Part Number 4591986AA
    Bundle Listing No
    Weight 2.1LB
    OE Spec or Performance/Custom OE Spec
    Fuel delivery type Fog-type spray

    Shipping

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
    3.Local pick up is not available.
    4.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

    Payment

    1.We accept multiple payment methods, such as PayPal, VISA, Master Card, etc..

    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 7 days as auction ended or order might be delayed.

    Returns

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]

    Customer Services

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal, VISA, Master Card, etc..
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    Feedback

    1. We will leave a feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
    3. If you are satisfied with the product you received, wish you can leave us a feedback.

    Shop Category
    Warranty
    Fuel Injectors For Dodge Nitro 2007-2011 Chrysler Town & Country 4.0L 2008-2011

    What is a fuel injector?

    A fuel injector is a device for atomizing and injecting fuel into an internal combustion engine. It's consistently under pressure.

     

    Symptoms you require fuel injector replacement

    • Check Engine Light is illuminated;
    • The engine runs rough or there’s a dead miss in a cylinder;
    • There’s a raw fuel smell from the engine or the exhaust.

     

    How to Replace Fuel Injectors?

    Tips to remember

    It is advisable that when you plan to change the fuel injectors, change them all. Do not change just the ones that are malfunctioning. Pairing brand new injectors with old ones could cause inconsistent performance and a less than satisfactory driving experience. 

    WHAT YOU'LL NEED

    • Replacement fuel injectors
    • Fuel injector seals
    • Ratchet & socket set
    • Flathead screwdriver
    • Pliers
    • Towels

    STEP:

    1. The metal rod over the fuel injectors is the fuel rail. Use the socket and ratchet to remove the bolts and brackets holding the fuel rail in place. Depending on the model, some engines will need the fuel line disconnected from the fuel rail in order to move the rail.

    PRO TIP: This step usually depressurizes the fuel system in multi-port fuel injected vehicles, but your engine may vary. Check your repair manual to be sure.

    2. Make sure the engine is cold enough to touch. Disconnect the battery.

    3. Remove plastic engine covers using appropriate socket. Set covers aside.

     

    4. Use pliers to disconnect the electrical connector on each injector.

    5. Lift the fuel rail off of the intake manifold, bringing the injectors with it. This takes a good amount of force, as the injectors are attached to the rail, and the sprayer tips are a snug fit in the intake manifold. Don't use so much force, though, that you deform or bend the fuel rail. Pulling straight up (as the injector is oriented) makes for easier removal.

     

    6. Examine the injector. If you see a small metal clip that looks like a staple, use a small flathead screwdriver to remove or depress the clip. Grasp the injector and work back and forth while pulling to remove from the fuel rail. The injector and rail will drip, so have shop towels ready.

    PRO TIP: Before installing the new fuel injectors, dip the fuel injector tip (sprayer end) into a small amount of engine oil. This will wet the seals, preventing leaks. 

     

    7. Press the injector into the rail until it stops. Attach the metal clip, if equipped.

    8. Reattach the fuel rail. Line up all the injectors over their respective holes, then press each injector until they slide into place.

     

    9. Bolt down fuel rail. Reattach fuel line. Plug in fuel injector electrical connections.

    10. Reconnect battery.

    11. Turn the key to the on position and wait 10 seconds before turning to engine start. This will allow the fuel pump to refill the lines and fuel rails before the engine cranks.

    12. After the engine drops to the normal idle RPM, turn the engine off. Take a flashlight and check all the injectors for fuel leaks.

     

    How important is replacing your fuel Injectors?

    A leaking or plugged fuel injector causes the related cylinder to run rich or lean, both of which can cause long-term problems that require extensive repairs.

    In addition, your car’s performance will suffer and your Check Engine light will remain on until the repair is performed.

     

    Is there a break-in period with my new fuel injectors?

    Yes & No. All of our fuel injectors are ready to operate upon installation.

    Starting the engine and letting it idle for a minimum of 20 minutes is the best thing to do after installing new injectors. This will push the aerated fuel out of the injector nozzle. Failure to do this may create a low/no-fuel condition, which could cause internal damage to the injectors. The new fuel injectors will perform great initially, and you will continue to see increased performance up to 1000-3000 miles as the injectors continue to break-in.

     

    Can you upgrade fuel injectors?

    Yes, a fuel injector upgrade is a great option to help add miles-per-gallon or restore lost power and torque in older or high-mileage engines. The first thing to know is "upgrading" does not mean changing the injector flow-rate. Upgrading means replacing old, worn, OEM fuel injectors with a new set of fuel injectors. This upgrade can improve the overall performance of an older engine.

     

    There are 2 types of fuel injectors:

    1. Diesel Fuel Injectors

    Modern diesel fuel injectors are used to atomize and inject or spray diesel (which is heavier fuel than gasoline) directly into the combustion chamber of the diesel engine for compression ignition (no spark plugs).

    Diesel fuel injectors require much higher injection pressure (up to 30,000 psi) than gasoline injectors as diesel is heavier than gasoline, and it takes much higher pressure to atomize the fuel.

    2. Gasoline Fuel Injectors

    Gasoline fuel injectors are used to inject or spray gasoline directly (GDI) or through intake manifold (multi-port) or throttle body into the combustion chamber for combustion which is ignited by spark.

    The design of gasoline injectors varies by type… the newer GDI injectors use a multi holed nozzle, the multi-port and throttle body use a pointless style nozzle. Gasoline injection pressures are much lower than Diesel…3000 psi for GDI and 35 psi for Pinter style.

     

    Clogged Fuel Injectors

    It is not easy to diagnose a fuel injector as the symptoms it causes can be like a bad spark plug or ignition coil, meaning, one of the cylinders is not firing. If it is related to a clogged fuel injector it is due to old fuel being run through the engine, resulting in residue getting stuck inside the injector or its filter basket. If a fuel injector becomes fully clogged it will have to be removed from the vehicle and be professionally cleaned, as additives and fuel tank introduced injection cleaners will not be able to clear the clog, as they cannot pass through at all.

     

    Leaking Fuel Injectors

    This can be an extremely dangerous situation. If the fuel injectors are leaking externally, you should not drive your vehicle. While a leaking injector will cause issues like that of a dirty one, you will often be able to smell gas or diesel under the hood or even spot a leak, depending on your make and model. Externally leaking injectors pose a fire risk and need to be completely replaced.

     

    Fits Applications

    Chrysler 300 2.7L 2005-2010
    Chrysler 300 3.5L 2005-2010
    Chrysler Pacifica 3.5L 2005-2006
    Chrysler Pacifica 4.0L 2007-2008
    Chrysler Sebring 2.7L 2004-2010
    Chrysler Sebring 3.5L 2007-2010
    Chrysler Town & Country 4.0L 2008-2010
    Dodge Avenger 2.7L 2008-2010
    Dodge Avenger 3.5L 2008-2010
    Dodge Challenger 3.5L 2010
    Dodge Charger 2.7L 2006-2009
    Dodge Charger 3.5L 2007-2010
    Dodge Charger 5.7L 2008 
    Dodge Grand Caravan 4.0L 2008-2010
    Dodge Journey 3.5L 2009-2010
    Dodge Magnum 2.7L 2005-2008
    Dodge Magnum 3.5L 2005-2008
    Dodge Nitro 4.0L 2007-2011
    Dodge Stratus 2.7L 2004-2006


    Shipping

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
    3.Local pick up is not available.
    4.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]

    Payment

    1.We accept multiple payment methods, such as PayPal, VISA, Master Card, etc..

    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 7 days as auction ended or order might be delayed.

    Returns

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]

    Customer Services

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal, VISA, Master Card, etc..
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    Feedback

    1. We will leave a feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
    3. If you are satisfied with the product you received, wish you can leave us a feedback.


    Copyright of SCITOO-AutoParts . All rights reserved.