Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-Core Processor, 264KB SRAM And 16MB Onboard Flash Memory, Compatible With Raspberry Pi 40PIN GPIO Header
RP2040-PiZero Development Board
Based On Raspberry Pi RP2040
Onboard DVI Interface, TF Card Slot And PIO-USB Port
Board Specifications
RP2040-PiZero is a high-performance and cost-effective microcontroller board designed by Waveshare, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, easy to develop and integrate into the products.
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 16MB of onboard Flash memory
- Onboard DVI interface can drive most HDMI screens (DVI compatibility required)
- Supports using as a USB host or slave via onboard PIO-USB port
- Onboard TF card slot for reading and writing TF card
- Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios
- USB 1.1 with device and host support
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
Integrates Multiple Interfaces
Onboard DVI Interface, PIO-USB Port And TF Card Slot For More Possibilities
for reference only, the 1.3inch LCD HAT and 7inch HDMI LCD (H) are Not included
Support C/C++, MicroPython, Arduino
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
* the DVI and PIO-USB functions are only supported in C environment and cannot be used at the same time
Dual-Core ARM Processor
Dual-Core ARM Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz
What's On Board
- USB Type-C connector
for communication and program burning - PIO-USB port
for using as USB host or slave via PIO - DVI interace (Mini HDMI connector)
for driving DVI screen with HDMI cable - TF card slot
SPI interface communication - RP2040
dual-core processor, up to 133MHz operating frequency
- W25Q128JV
16MB NOR-Flash - RUN button
reset button - BOOT button
Press it when resetting to enter download mode - Lithium Battery Header
PH2.0 header, for connecting 3.7V Lithium battery, allows recharging/discharging the battery - 40PIN GPIO Header
Compatible with some Raspberry Pi HATs
Product Show
Outline Dimensions
Resources & Services
Pico Product Selection
PRODUCT | MAIN CHIP | VOLTAGE REGULATOR CHIP | USB | FLASH | LITHIUM BATTERY HEADER | ONBOARD LCD |
---|
RASPBERRY PI PICO W | RP2040 | DC-DC, 3000mA | Micro USB | 2MB | - | with WIFI |
---|
RASPBERRY PI PICO WH | DC-DC, 3000mA | Micro USB | 2MB | - | with WIFI |
---|
RASPBERRY PI PICO | DC-DC, 800mA | Micro USB | 2MB | - | - |
---|
RASPBERRY PI PICO H | DC-DC, 800mA | Micro USB | 2MB | - | - |
---|
TYPE-A VER. | LDO, 500mA | Type-A | 4MB | - | - |
---|
MINI VER. | LDO, 800mA | Type-C | 2MB | - | - |
---|
TINY VER. | LDO, 500mA | Separate Type-C port adapter | 2MB | - | Separate adapter board design, adapting USB Type-C port via FPC |
---|
RGB MATRIX VER. | LDO, 500mA | Type-C | 2MB | - | Onboard 5×5 RGB LED matrix |
---|
ETH PORT VER. | LDO, 500mA | Type-C | 4MB | - | with Ethernet port |
---|
ROUND LCD VER. | LDO, 300mA | Type-C | 2MB | Support(allows recharging the battery and powering the board at the same time) | 1.28inch IPS LCD |
---|
ROUND TOUCH LCD VER. | LDO, 500mA | Type-C | 4MB | Support(allows recharging the battery and powering the board at the same time) | 1.28inch Touch LCD |
---|
LCD VER. | DC-DC, 1800mA | Type-C | 2MB | Support(allows recharging the battery and powering the board at the same time) | 0.96inch IPS LCD |
---|
PLUS VER. | DC-DC, 1800mA | Type-C | 4MB/16MB | Support(allows recharging the battery and powering the board at the same time) | - |
---|
DVI PORT VER. | LDO, 300mA | Type-C | 16MB | Support(allows recharging the battery and powering the board at the same time) | Onboard DVI interface, TF card slot and PIO-USB port |
---|
PACKAGE CONTENT
Weight: 0.012 kg
RP2040-PiZero x1