KUMHO ESCTA PS71 235/35ZR19 91Y TYRE 7.7.7mm

KUMHO ESCTA PS71 

235/35ZR19 91Y 

TYRE 6mm TWO PUNCTURE REPAIRS ONE ON THE EDGE SEE PHOTOS.

BUY WITH CONFIDENCE. TYRES SHIPPED USING PARCELFORCE 24 HR SERVICE. FREE SHIPPING ON EVERY TYRE. 

Here at TYRES-IN-24HRS we pride ourselves on selling good quality tyres at better than reasonable prices. Not only do our tyres comply with British Standards BS AU 159, but they comply with all elements described by the UK government. Below is a direct copy of information from the UK government website, giving information on part worn tyres. All of our descriptions are accurate and the photo's are for the tyre you are buying. 

Part-worn tyres are in use every day. If you buy a second-hand vehicle and do not replace the tyres with a new set immediately you are, in effect, buying part-worn tyres. But some tyres are sold as part-worn without the second-hand vehicle! It is not illegal to sell and fit these part-worn tyres (Driver and Vehicle Standards Agency, Traffic Commissioners for Great Britain). New tyres are manufactured to a very high standard and are designed to be safe down to the legal tread limit.

Look out for the general condition of any part-worn tyres you are thinking of buying. You should check:

• Any penetration damage has been repaired to British Standard BS AU 159 

• The structural integrity isn’t compromised. They should be free of cuts longer than 25 millimetres or 10% of the section width of the tyre (whichever is the greater), measured in any direction, on the outside of the tyre and not be deep enough to reach the ply or cord 

• The original grooves are clearly visible in their entirety and must be to a depth of at least 2mm across the full breadth of the tread and around the entire circumference 

• There are no lumps or bulges either internally or externally caused by the separation or partial failure of its structure 

• None of the ply or cord is exposed internally or externally 

• Tyres must have passed an inflation test before sale. When inflated to the highest pressure at which it is designed to operate, the tyre must not exhibit any of the external defects