This reversing camera is popular with people who own motorhomes and vans, and who want a more rounded looking camera instead of the angular bracket type.

This type of camera was actually used as standard on a lot of Elddis motorhomes.  If you are looking to replace an Elddis motorhome camera then this will fit. Be aware that some Elddis white dome cameras use the same 4 pin screw type connection as we use, and some use a push fit connector. We do stock a converter adaptor lead if you are replacing a push fit type, so please send us a message if you would like to order one of these at the same time.

The image sensor we have installed is one of the best available from Sony, it is their 700TVL CCD.  It is the larger image sensor at 1/3". 

The camera has the 4 pin plug on it's fly lead, this is waterproof.

The camera is waterproof up to IP68.

Camera works on 12V but if you buy with a 12V/24V monitor, the monitor reduces the voltage down to 12V.  This is the norm, and most 24V systems actually only supply 12V to the camera.

Uses PAL video format.

Technical Specs

Image Device:1/3 SONY CCD 811 960H
TV System: PAL
Effective Pixels: 976*582
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR leds on)
Video Output:1.0vp-p,75Ohm
Gamma Consumption: 0.45
AGC: Auto
S/N Ratio: Better than 48dB
White Balance: Auto
Electronic Shutter: 1/50Sec-12.5μSec (PAL)
BLC: Auto
Current Consumption:100mA
Waterproof to Ip68
Infra red LEDs to provide night view
Mirror image