By clicking on "Buy it now", you agree that you will do full testing by connecting to the connector ONLY, WITHOUT applying heat, glue, using solvent, adding frame or peeling off the protective film etc. You have 30 days to run all testing needed. However if you modify the screen such as peeling off protective film, adding frame, adding glue or finger print sensor, you can NO longer return due to damage caused by your repair. Same applies if you have your friends or a shop doing the repair. 

I do business based on honesty and integrity, and have a lot of 2nd time buyers and experienced first time buyers who treat the display as a delicate device and work carefully on it. I don't want to see returns with delaminated TFT layer or fake display ordered from elsewhere. Please don't order from me if there is no intention to follow the basic rules. Thanks for the attention!

OLED display for Pixel 4 only in working condition. The display has a few missing pixels around upper left corner, Mostly cosmetic, won't impact actual usage. It's for replacing a Pixel 4 with a damaged screen. Only the pictured item is included. There is no frame included. 

Please read this carefully as I want to see all happy buyers and strive to make a smooth buying and repairing experience. You need to be familiar with repairing electronics and dealing with fragile displays. Please ONLY buy this if the phone is working and showing at least some images on the old display, a damaged display typically shows some images -- This display WON'T solve phone boards issue for SURE, if nothing shows on old display.  Please make sure phone is fully shut down and USB-C is not plugged in, before connecting or disconnecting the connector -- display won't start if you do it while phone is running, and may risk damaging the phone or display. Please test new screen thoroughly to confirm the display and touch both are working, BEFORE removing the protective film or trying to repair or seal it up. Please do NOT use hard tool, and do NOT press into the delicate edges where TFT traces are routed. Please do NOT apply heat exceeding 100°C. Please do NOT use strong solvent or un-supported glues which may cause display de-lamination or lines stuck on/off. The display is very delicate so please take extra caution in handling it, especially on the edges when adding frame, fingerprint sensor etc. I would rather see less sales than people sending back damaged screens. If you modify the screen such as adding frame, adding glue or finger print sensor, you can no longer return due to damage caused by your repair.

It takes 90 min to replace the LCD: Heat up the back cover from around the edges. Keep the temperature not to exceed 100C. Use a guitar pick, start from middle of the long side, gently insert it under the back cover and walk the way along the seam, until the entire back cover is peeled away. Repeat similar process to remove the display. The display Flex circuit is on the left middle, please don't push too deep into the unit. Remove the screws around the metal cover holding the display connector. Removed the damaged screen. Repeat the process backward to install the new part. To restore the water proof rating, you need glue or PSA (not included) to seal the display seam. 

Buy OEM parts to have the best compatibility and quality. Please follow  all ESD precautions during the replacement. Buyer understands the repair may void the warranty. Buyer is responsible for issues arise from the repair.

Payment