eBay

Product detail:

Name:

Double Side Magnetic Spring Steel Sheet Round 220/240/265mm PET sheet, 180/220/235/257/241/300/310/350mm PET/PEI/PEO Coated Textured Smooth Flexible Hotbed Plate Sheet For Ender-3 CR10 ( with or without magnetic base )

Size and Applicable printer：

Square Sizes:

180x180mm: Kingroon KP35 Prusa Mini

220x220mm: Anet A8/Wan hao Duplicator i3

235x235mm: Ender 3/Pro/3S/5 S1/ CR20

257x257mm: Bambu lab x1

241x254mm: Prusa I3 MK3s

300x300mm: Kingroon KP5L

310x310mm: Artillery Sidewinderx1x2

350x350mm: FYSETC Voron 2.4

Round Sizes :

220mm, 240mm, 265mm, for the printer which with 220mm, 240mm, 265mm hotbed.

Except above model and also use for other similarly sized hotbed.

If you are not sure which size match your hotbed, please measure again before you place a hotbed sheet.

Print Instructions:

1. When first time printing, keep the built sheet smoothing (the nozzle and the hot bed distance adjust to A4 paper thickness).

2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.

3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base.

4. we suggested printing temperature: PLA 60℃ PETG 70-80℃ ABS 90-100℃.

Start printing in PET and PEO sheet, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (PEO/PET do not exceed 80°C).

PEI sheet can be work in 160°C~180°C for a long period of time, PEI can not over 200°C.

5. Take off the sheet from printing surface and bend the sheet slightly, you can easy to take the model.

Note 1:

DO NOT USE ACETONE ON POWDER COATED PEI SIDE!

Note 2:

PET,PEO and PEI must be used with the magnetic base.

If you are going to buy a product without magnetic base,

please make sure you already have a magnetic base.

Package including:

1. Without magnetic base: one piece Spring Steel Build Plate Sheet.

2. With magnetic base: two pieces, one piece Spring Steel Build Plate Sheet+one magnetic rubber base.

PET Surface:

one side is smooth PET surface, another side is textured PEI surface.

Round Surface:

one side is smooth PET surface, another side is textured PEI surface.

PEO Surface:

one side is smooth PEO surface, another side is textured PEI surface.

PEI Surface:

Double side are textured PEI surfce .

Smooth PEI Surface:

one side is smooth PEI surface, another side is textured PEI surface.

PET Exploded diagram

About product:

Three layer material in the exploded diagram PET+Spring steel plate+PEI combine to one build plate sheet, it is the surface(A).

The structure of material for PEI and PEO are same with PET.

Maintenance

Wipe the print surface before and after a print with Isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength. As with any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface. If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed.