Model HL-YMC I Mixer is our company’s first generation mixer, the first semi-automatic alginate mixer on the domestic market. This equipment is used for making false teeth; it replaces the handwork of mixing the Impression Material. It has characteristics of labor-saving, fast, well mix and less bubble .

 

 

1.Power switch: a black boat-shaped switch behind the machine.

2. Mixing bowl: lay it on the tray at the top of the unit. Clockwise the mixing bowl into the tray, it will be locked. On the contrary, the mixing bowl can unloaded.

3. “Start/Set” button: the “Start/Set” button is at left side of the front panel. The first press starts to low speed; it will become high speed after press again.

4. “Stop” button: The “Stop” button is at right side of the front panel, press “Stop” button will stop working immediately.

5. SKU: ZR-D-YMCI

 

 

1. Put the cleaning and disinfected mixing bowl into the tray, turn clockwise to lock it.

2. Let power plug connect to the electric socket with grounding, turn on the power switch 6

3. Put the water and impression material into the mixing bowl according to the proportion from the manual of impression material. Then mix them to bulk state.

4. Put the spatula into mixture, press Start/Set button10 to start at low speed (the liquid and powder will not easy to spill out when in low speed), close the spatula along the mixing bowl and move it according to the rotate direction.

5. Press Start/Set button 10 again, it will rotate in high-speed . The spatula should along the wall of mixing bowl, it’s better for mixing, after 20S the alarm light will flash to notice user to use the mixture as soon as possible.

6. Press “Stop” button to stop working. Use spatula along mixing bowl to remove the mixture, just complete.