Specs:

Outside Circumference: 37.125" (981mm); Top Widthy: 1.281" (33mm); Height: 0.67''(17mm)

Package includes:

1 x Carbon Cord G-Force CVT Drive Belt

High-tech component for transferring power on ATVs, UTVs, snowmobiles or other powersport equipment.

Replaces OEM Number: 

420280360 / 420280362 / 422280360 / 422280364 / 715000302 / 715900212 / 715900030 / 30C3750

Drive Belt Fits On: Can-Am

  • 2011+ Commander 1000 4x4
  • 2011+ Commander 800R 4x4
  • 2016 Commander MAX 1000 4x4
  • 2013+ Maverick 1000R
  • 2014+ Maverick Max 1000R
  • 2012+ Renegade 1000 4x4
  • 2016+ Renegade 1000R 4x4
  • 2008+ Renegade 500（H.O. EFI）4x4
  • 2016+ Renegade 570 4x4
  • 2022 Renegade 650 4x4 X-MR
  • 2008 Renegade 800 H.O. EFI 4x4
  • 2009+ Renegade 800R 4x4
  • 2016-2022 Renegade 850 4x4
  • 2012+ Outlander 1000
  • 2016+ Outlander 1000R 4x4
  • 2009+ Outlander 500 4x4
  • 2016+ Outlander 570 4x4
  • 2007+ Outlander 650（H.O. EFI）4x4
  • 2015-2016 Outlander 650 6x6 XT
  • 2007-2008 Outlander 800 H.O. EFI 4x4
  • 2009+ Outlander 800R 4x4
  • 2016+ Outlander 850 4x4
  • 2013+ Outlander Max 1000 4x4
  • 2016-2022 Outlander Max 1000R 4x4
  • 2009+ Outlander Max 500（H.O. EFI） 4x4
  • 2016+ Outlander Max 570 4x4
  • 2009+ Outlander Max 650（H.O. EFI） 4x4
  • 2007-2008 Outlander Max 800 H.O. EFI 4x4
  • 2009+ Outlander Max 800R 4x4
  • 2016+ Outlander Max 850 4x4

How To Change The Drive Belt?

Drive belt installation method

1. Turn off the power, remove the protective cover, screw the assembling bolt of the motor, move the motor to loose the belt,remove the old belt. (NOTE: Don’t pry on the belt. If the belt has excessive wear and tear, that means a problem with the design and maintenance of the transmission.)

2. Choose the suitable belt. Clean the belt and pulley. Wipe the rag with a little non-volatile liquid. The belt must be kept clean before installation and use. (NOTE: Don’t soak in detergent or scrub with detergent. Dont’t use sandpaper or sharp objects to scrape oil or dirt.)

3. Check whether the pulley is linearly symmetrical and other transmission component.

4. During break-in period, the following activities could be done: Vary vehicle speed and engine RPM to shift belt through normal operational range Do not exceed ¾ throttle within the first 30 miles of installation Stop engine and allow belt to cool down every 15 minutes of use.


11