Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable enough. Specially designed the following point.

• Adjusted the height of the frame, the lowest point of frame is the motor position, battery can be protected while the drone is landing.

• Increased the height of the frame loop to protect the propeller better.

Best recommended for Advanced kit drone - Meteor75 Lite and Meteor75.

Bullet Point

• Meteor75 frame is ultralight only 5.68g, light but durable enough. 

• The motor mount position uses a quadrilateral stretch structure, the frame is more durable and stable. 

• The height of the frame has been adjusted, the lowest point of the frame is the motor position, the battery can be protected while the drone is landing. It also increased the height of the frame loop to protect the propeller better.

• Designed two different motor mounting holes that support 0603, 0802 and 1102 brushless motors at the same time.

• With a 26mm*26mm FC mounting columns can match whoop style FC.

Specification

• Item: Meteor75 frame

• Material: Plastic

• Size: 75mm

• Weight: 5.68/pc

• Color: White/Blue

• Motor mounting hole: For 0603 motor, 1102 Series Motors and 0802 Series Motors

• FC mounting hole:26mm x 26mm, fully compatible with whoop style FC board mounting pattern

Recommended Parts

• Propellers: 40mm 4-blade props (1.5mm shaft hole)

• Motors:0603and0802 Series Brushless Motors /1102 Series Motors

• Batteries: BT2.0 450mAh 1S Battery, BT2.0 550mAh 1S Battery

• Screws: Meteor Series Motor Fixing Screws Pack (40PCS)

• FC: F4 AIO 1S Brushless FC/ 1-2S AIO Brushless FC

Package

1 * Meteor75 Micro Brushless Whoop Frame

Bullet Point

• Compared to the previous 65mm brushless frames, with the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness.

• The space for the FC board is limited in order to support 35mm propellers on a 65mm drone. So this Meteor65 Pro frame could only support cross shape FC board. The normal whoop FC board DO NOT fit this frame.

• Meteor65 Pro frame’s motor mounting position uses a triangle bilateral stretch structure, making the frame more aesthetic. It provides you more durable and smoother flight experience.

• The ultra-light and durable frame is PP material only 3.20g, which is one of the lightest frames that can match the F4 1S 5A AIO Brushless Flight Controller (ELRS 2.4G).

• The frame is suitable for 31-35mm propeller like Gemfan 35mm-3 propellers. Pay attention, HQ 35mm propellers is a little bit bigger and DO NOT fit for this frame.

Colored Frame Series

Meteor65 Pro Brushless Whoop Quadcopter has become more popular among most pilots since its release. Not only durable as before and also with more colors. Now, we published new frames with 10 new colors for Meteor65 Pro. Choosing the one color you like, or collecting them all to mix and match the drones.

Specification

• Item: Meteor65 Pro Frame

• Material: PP

• Size: 65mm

• FC mounting hole: 26mm x 26mm, compatible with cross shape whoop style FC board mounting pattern. DO NOT compatible with normal whoop FC board.
  

• Motor mounting hole: For 0802SE 19500KV motor
  

• Weight: 3.20g

• Suitable propeller: 35mm or 31mm propellers. Recommend Gemfan 35mm-3 propellers. Pay attention, HQ 35mm propellers is a little bit bigger and DO NOT fit for this frame.

Recommended Parts

Meteor65 Pro frame is only compatible with cross shape FC board and Gemfan 35mm-3 propellers.

• Propellers: Gemfan 35mm 3-Blade Props
  

• Motors: 0802SE 19500KV motor

• Batteries: BT2.0 300mAh 1S Battery

• FC: F4 1S 5A AIO Brushless Flight Controller (ELRS 2.4G)

• Screws: Meteor Series Motor Fixing Screws Pack (40PCS)

Note: HQ 35mm propellers is a little bit bigger and DO NOT fit for this frame.

Note: Normal whoop FC board is NOT compatible with this frame.

Package

1 * Meteor65 Pro Frame Kit