Quartz Clock Movement Long and Short Shaft Clock Mechanism with Hands
Features: Clock Movement Mechanism. Ultra Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a environmen
Suitable for DIY quartz wall clocks, wall clocks, metal wall clocks, craft clocks, frameless wall clocks, etc., to replace broken clocks, etc.
DIY Wall Clock Repair Parts Kits. Easy for installation in one set.
Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buyi
Wide Application. DIY quartz wall clock replacement movement parts. Good handwork material to make a clock by yourself.

Specifications: Material: Plastic, Brass, Aluminum
Colors: Black
Weight:Approx. 180g
Movement Size: Approx.56x56x16.2mm/2.20x2.20x0.64in
Movement Shaft Length: Total Shaft Length 20mm(0.79in), Thread Height 8.7mm(0.34in). Suitable for 2-5mm(0.08-0.2in) thick clock panel
Pointer Size: the total round hole is measured to the end of the needle, Hour Hand: 108/154mm(4.25x6.06in), Hand 153.5/208mm(6.04x8.19in). Suitable for clocks with a diameter of 320mm(12.60in) or more
Power: 1.5 V AA 1 Piece Battery (not included)

Package Includes: 1 Piece Quartz clock movement
2 Pieces Hands
2 Pieces Hour Hands
1 Piece barrier Nut
1 Piece Brass Hex Nut
1 Piece Rubber Gasket
1 Piece Brass Washer
1 Piece Metal Hook

note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
3.The hour and hands have a protective plastic coating that needs to be carefully removed.
4.Be careful not to bend the hands with too much pressure.
5.Please do not use alkaline rechargeable or they will damage the movement.
6.Do not tighten the brass hex nut too tight.
7.Press hard to get all clock hands in place.
8.Check if all hands are aligned.