We've put together this money-saving set so you can experience chip-free fret jobs. The StewMac Precision Fret Puller offers improved chip-stopping performance, control, and comfort: Jaw tips are precision-ground to the perfect angle. Better visibility of the work through the larger throat opening. Longer handles are more comfortable. We tested various designs and jaws to find the ultimate angles for extraction. Our Precision Pullers are meticulously ground to our specifications: The outer face is ground and polished to be flush with the fingerboard, and glide under the fret crown edge. The inner jaw tips are ground to a 45-degree angle to gently nudge the fret free of its slot as the jaws close. By carefully exerting less force on the fret wire, the smoother action eliminates unwanted chipping, especially if you've loosened the glue a bit with a warm soldering iron. When working with dry and difficult fretboards, use the Precision Pullers with our Chip Stoppers for an extra layer of confidence in a chip-free and hassle-free job: The Chip Stoppers press down on the fingerboard as the Precision Pullers takes frets out. You get fewer chips, and cleaner refrets. Most often, you'll use the .020" Chip Stopper. Sometimes the .010" will suit you better, and you can also combine them for a .030" total thickness. Do not use the pullers to cut fretwire—the custom ground jaws can be damaged if used for anything other than pulling. Features and specifications of the Precision Fret Puller: Smooth spring action for excellent control Comfortable rubberized handles Sturdy steel construction Overall length: 6" Throat depth: 1" Face width: 3/8" The set includes: 1 Fret Puller and 2 Chip Stoppers (one .010"-thick stopper and one .020"-thick stopper)