This is made in USA by WCM!!!

Beware: There are chinese sellers with items that look exactly like ours. Some are even going through a USA seller. These are cheap knock offs and in no way are associated with our products. We are the only seller on ebay selling our bike tools. Please dont assume the other peoples quality level is the same as ours.

 This auction is a combination set. It has 7 tools for the 2021-2024 fox dhx2 and X2 shocks. This is exactly the same as our 6 set with a IFP tool added.

All tools are made in the USA. They are CNC machined out of 6061 aluminum.  This is all the clamps and all the pinned sockets you need to rebuild the fox 2021-2024 X2 shock. Well sell smaller kits as well and several individual items for the 2021 and older X2.

First we have shock clamp for the 2021-2024 FOX float dh x2 and X2. The clamp fits the 3/8" shaft and the inner air sleeve. The 3/8 will not fit older versions of the x2 shocks. Its made for a precision fit. We left plenty of material so there is a lot of clearance when using the 3/8 shaft clamp, and we made it .440 thick to fit into the tight spaces. It is thin enough to fit the 2021 version shock. It is the same fit as fox tool number 803-01-690

Next we have a wrench for the negative air seal head. Its 9.5" long and has chamfered corners so its easy on your hands. It has a 3/8" square drive so you can torque it to spec, just line the torque wrench up to the line (perpendicular to the wrench) and your good to go. This is the same fit as fox part number 398-00-419. This tool fits 2016-2024 x2 and dhx2 float shocks.

Then we have a bearing housing driver, this is the tool on step 12 of the fox float x2 rebuild instructions. This is the same fit as fox tool number 398-00-887. This is used on the 2021-2024 fox x2 shocks. It has 4 hardened steel pins and is CNC machined for a great fit. It has a 30mm hex that is plenty tall for a wrench or a crescent.

Then we have the REZI vice clamp. It includes the 1.25 inner air sleeve clamp , equivalent to fox part number 803-01-690 and the Rezi body clamp, equivalent of fox 803-01-545 . The rezi body clamp is only used in 2021-2024 and the inner air sleeve clamp will fit all fox shocks.  The rezi body side of the clamp we left plenty of clearance so you end up with 170 degrees of working room. Clunky clamps can be as little as 90 deprees.

Next we have a IFP for the 2021-2024 X2 and dh x2 fox float shocks.  The shaft measures 1.14 long. It goes around the the pull out tab for an accurate measurement, you just push it all the way down and your done. This tool does not remove the IFP, all shops i talked to said they preferred to use air for the ifp removal.

Last we have a cartidge cap tools. They have 4 hardened pins that fit both redand blue caps for the 2021-2024 dhx2 and X2 shock only. One has has a 3/8" square drive, the other will fit a 5/8 or 16mm socket. It is the same fit as fox tool number 398-00-882 and 398-00-881

Shock is NOT included in auction, just the tool. We have several listing of these tools individually or in small sets.