JL Audio 12W7AE-3 W7 Series Anniversary Edition 12 Inch Sub Subwoofer 1000w RMS

10th Anniversary Edition - W7 12-inch Subwoofer (1000 W, 3 Ω) 

The 12W7AE brings serious performance to the table by combining the breakthrough of the long-excursion W7 design with a large 12-inch bore. It has been called "addictive," "seductive" and "the new subwoofer reference", by some of the world's toughest reviewers, and has earned these accolades by delivering nearly limitless dynamics, exceptional balance and world-class sound quality.

This potent driver is best used with amplifier power in the 400W - 1000W range and is optimized to operate in a 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but are they distinguished by the following cosmetic differences:

• Satin-Black Powdercoated Baskets
• Bright Anodized Surround Clamp Ring
• Anniversary Edition Cone Badge
• Anniversary Edition Terminal Label

W-Cone

The W-Cone is a unit-body cone assembly that delivers astonishing cone stiffness with minimal mass. The shape also provides superb torsional rigidity, which is critical to maintaining voice coil alignment at the suspension limits.

OverRoll™ Surround

By utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.

Floating Cone Attach Method - FCAM™ 

This assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.

OverRoll™ Surround

By utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.

Radially Cross-Drilled Pole-Piece

This innovative venting system greatly enhances thermal dissipation and power handling by directing air flow onto the voice coil former, working in conjunction with the Elevated Frame cooling technology to effectively remove heat from the voice coil. This improves power handling and reduces power compression effects, leading to more linear performance.

Engineered Lead-Wire System

Carefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.

• Continuous Power Handling (RMS)    1000 W
• Recommended Amplifier Power (RMS)    400 - 1000 W
• Nominal Impedance (Znom)    3 Ω
• Nominal Diameter    12.0 in / 300 mm
• Overall Diameter (A)    12.5 in / 318 mm
• Mounting Hole Diameter (B)    10.5 in / 267 mm
• Bolt Hole Circle Diameter (C)    11.27 in / 286 mm
• Motor Outer Diameter (D)    7.5 in / 191 mm
• Mounting Depth (E)    9.5 in / 241 mm
• Driver Displacement    0.14 cu ft / 4.0 L
• Net Weight    45 lb / 20.4 kg
• Free Air Resonance (Fs)    27.2 Hz
• Electrical “Q” (Qes)    0.514
• Mechanical “Q” (Qms)    7.807
• Total Speaker “Q” (Qts)    0.482
• Equivalent Compliance (Vas)    2.33 cu ft / 66.0 L
• One-Way Linear Excursion (Xmax)*    1.15 in / 29 mm
• Reference Efficiency (no)    0.25%
• Efficiency (1 W / 1 m)**    86.2 dB SPL
• Effective Piston Area (Sd)    84 sq in / 0.0542 sq m
• DC Resistance (Re)    2.47 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.

** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

• 12W7AE-3
• Warranty Information