NICECNC Fuel Transfer Kit For KTM 150 XCW TPI 250 300 XC XC-W EXC TPI 2020-2024
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Product Description
The Fuel Transfer Kit is an excellent tool for transferring petrol from one EFI or TPI motorcycle to another when you run out of fuel on the trail, for filling your petrol stove bottle when camping, and as a shop tool for emptying petrol tanks before servicing.
Running out of fuel is never fun, but modern fuel-injected motorcycles don't have a fuel petcock to siphon off petrol from your buddy's motorcycle. Of course, you can hang a piece of fuel line in the tank and suck on it to get enough fuel in the line for gravity feed. But this method risks getting petrol in your mouth, which is not enjoyable.
This NiceCNC Fuel Transfer Kit (FTK) solves this problem and ensures you don't have a bad taste in your mouth.
If you use a piece of fuel line with a quick disconnect attached to your motorcycle's quick disconnect, simply pressing the starter button would be enough to transfer fuel. However, do you want to unnecessarily drain the battery and turn over the starter motor for minutes just to transfer a few liters of fuel? It takes nearly a minute to transfer one liter.
The FTK kit prevents this issue. It comes with a cable that powers the fuel pump directly from the battery, eliminating the need to turn over the starter motor. Just plug it into the tank connector and quickly attach the cable to the proper battery terminals to start pumping.
Compact and lightweight trail tool
You can also use the kit in the shop to quickly drain most of the fuel from the motorcycle tank into a fuel canister, but its design primarily focuses on being a compact and lightweight trail tool, you will have a power cable that is as compact as possible when rolled up.
The same goes for the FTK fuel line with a quick disconnect. It uses 1 meter of fuel line with a purposely chosen small, 6mm bore size to keep the line very compact when rolled up. As a result, the entire kit is really pocket-size small.
The fuel line uses the high-quality Polyurethane and stays flexible for a long time compared to PVC fuel line. The power cable connector is the same AMP Superseal connector as the OEM tank connector.
Item Specifications:
-- Brand: NICECNC
-- Condition: 100% Brand new
-- Wire Length:about 50CM
-- Tube Length:about 1M
-- AMP Connector
-- Tube Inside Diameter: 6MM
-- Tube Outside Diameter: 8MM
-- Tube Material: Polyurethane
-- Fuel Line Connector Material: Aluminium
Instructions
1.Take the seat off the bike that will share the fuel,
2.Next, disconnect this bike's fuel line quick disconnect,
3.Connect the FTK to the bike's quick disconnect fuel line,
4.Place the end of the FTK fuel line into the other bike's tank to be filled.
5.Unplug the OEM connector powering the fuel pump,
6.Plugin the FTK plug.
7.Attach the clip to the proper battery terminals.
8.When enough fuel has been transferred, pull the clip off the terminals.
Package Included:
1X Fuel Transfer Kit
Fitment:
For KTM 150 EXC TPI 2020-2023
For KTM 150 XC-W TPI 2020-2024
For KTM 250 EXC TPI 2018-2024
For KTM 250 EXC-F 2012-2024
For KTM 250 SX-F 2011-2024
For KTM 250 XC TPI 2020-2024
For KTM 250 XC-F 2011-2024
For KTM 250 XCF-W 2012-2016
For KTM 250 XC-W TPI 2018-2024
For KTM 300 EXC TPI 2018-2024
For KTM 300 XC TPI 2020-2024
For KTM 300 XC-W TPI 2019-2024
For KTM 350 EXC-F 2012-2024
For KTM 350 SX-F 2011-2024
For KTM 350 XC-F 2011-2024
For KTM 350 XCF-W 2012-2024
For KTM 450 EXC-F 2017-2024
For KTM 450 SMR 2021-2024
For KTM 450 SMR 2013-2014
For KTM 450 SX-F 2013-2025
For KTM 450 XC-F 2013-2025
For KTM 450 XCF-W 2023-2024
For KTM 450 XC-W 2012-2016
For KTM 500 EXC 2012-2016
For KTM 500 EXC-F 2017-2024
For KTM 500 XCF-W 2020-2024
For KTM 500 XC-W 2012-2016
For Husqvarna FC 250 350 450 2017-2024
For Husqvarna FC 450 ROCKSTAR EDITION 2018-2021
For Husqvarna FE 250 350 450 501 2017-2024
For Husqvarna FE 350S 2020-2023
For Husqvarna FE 501S 2020-2023
For Husqvarna FS 450 2017-2024
For Husqvarna FX 350 2017-2024
For Husqvarna FX 450 2017-2024
For Husqvarna TE 150i 2020-2024
For Husqvarna TE 250i 2018-2024
For Husqvarna TE 300i 2018-2024
For Husqvarna TX 300i 2020-2024
For GASGAS EC 250 2021-2024
For GASGAS EC 250F 2021-2024
For GASGAS EC 300 2021-2024
For GASGAS EC 350F 2021-2024
For GASGAS EX 250F 2021-2024
For GASGAS EX 300 2021-2024
For GASGAS EX 350F 2021-2024
For GASGAS EX 450F 2021-2024
For GASGAS MC 250F 2021-2024
For GASGAS MC 350F 2022-2024
For GASGAS MC 450F 2021-2024 DISCLAIMER
Disclaimer: nine-cnc parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco etc.
Payment Policy
![]() Shipping Policy
Return & Refund
Feedback
![]() About Item
Customer Satisfaction
Visit Our Store For Best Deal! Nine CNC Store
|