|
|
||||||
|
|
|
|
|||
Product Description:
Steering gear,also called steering gear, is the most important part of automobile steering system.
Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
Power steering rack and pinion is the most important part for vehicle swerving and security assurance.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
thus making it easier to turn the wheels.
Other Part Number: 26-2611 ; Rack 25507
Tech Info:
Grade Type : Performance
Bellows Color : Black
Gasket or Seal Included : No
Outlet Line Fitting Gender : Female
Inlet Line Fitting Gender : Female
Inlet Line Fitting Diameter : 0.630
Mounting Brackets Included : No
Outlet Line Fitting Diameter : 0.669
End To End Length : 46.50
Outer Tie Rods Included : No
Total Turns Lock To Lock : 3
Mounting Hardware Included : No
Mount Hole Quantity : 2
New Or Remanufactured Remanufactured
Compatible with the following vehicles:
Notes Year Make Model Trim Engine
2003 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated
2002 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated
2001 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated
2000 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated
1999 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated
Note:
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
note:
1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred.
2. Turn the steering wheel to the straight ahead position.
3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.
4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.
5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.
9. Keep the steering wheel in straight ahead position.
10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit)
| Item Specifics | |
|---|---|
| Brand | vap-autoparts |
| Manufacturer Part Number | VAP16546401SP |
| Type | Steering Gear,Steering Gear Body,Steering Rack,Rack & Pinion |
| Performance Part | Yes |
| Installation method | Performance/Custom |
| Transmission Type | Automatic |
| Material | High Quality Steel |
| Surface Finish | Polished, Rust Protected |
| Manufacturer Warranty | 3 Years |
| Vintage Part | Yes |
| Fitment Type | Direct Replacement |
| Rack Type | Hydraulic |
| Greasable or Sealed | YES |
| Other Part Number | Steering gear |
| Rack Material | corrosion and rust prevention |
| Note | Backed by satisfying after-sales service |
| Advantage | Rotate quickly and normal position |
| Interchange Part Number | 26-2611,Rack 25507,36R0929,19321027 |
| Superseded Part Number | 4550349095,4425048021,4425048041 |
| OE/OEM Part Number | rack replacement kit,rack and pinion,power rack parts |
| OE Number | Power Steering Rack,Steering Rack and Pinion |
| Sub Type | Rack and Pinion Assembly, Rack and Pinion Rack Gear |
| Package | Dust plug |
| Universal Fitment | No |
| Itment Note | Top performance For long service life |
| Mounting Hardware Included | As the picture |
| Fits | 1999-2003 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC |
| For | 2002 Lexus RX300 Base Sport Utility 4-Door 3.0L |
- Orders processed within 24-48 hours of payment verification.
- We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
- The images shown are not the actual item and are for your reference only.
- Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
- We accept payment via PAYPAL only.
- Payment must be made within 4 days of auction closing.
- S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
- 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
- Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible).
- You agree to all of the above-listed policies upon bidding on and winning this auction!
- We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- It is impossible to address issues if we do not know about them!
Store Cat. New List Item
Hot Item
|
26-2611 Steering Rack For 1999-2003 Lexus Rx300 2000 2001 2002 Cardone 26-2611
Product Description:
Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
Power steering rack and pinion is the most important part for vehicle swerving and security assurance.
It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
thus making it easier to turn the wheels.
Other Part Number: 26-2611 ; Rack 25507
Tech Info:
Grade Type : Performance
Compatible with the following vehicles:
Notes Year Make Model Trim Engine
Note:
In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
2. Turn the steering wheel to the straight ahead position.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
9. Keep the steering wheel in straight ahead position.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
Copyright of ignition-coil. All rights reserved. |
