Features:
1.This touch sensor river table module is made of high quality materials, stable and reliable, easy to install, no heat, low power consumption;
2. The thickness of the isolation sensor is about 3 cm, the thinner the thickness of the isolation, the higher the sensitivity, every touch, the light will cycle according to the seven colors bright;
3. The maximum load can be connected to the 5V 2A current within the strip, can support 12V, with 12V power supply need to use 12V strip;
4. Easy to use, simple operation, connected to the power can be used;
5. Wide range of application, suitable for a variety of materials: wood plexiglass acrylic resin stone plastic cardboard, etc., does not apply to metal materials.
Parameters:
Product Name:RGB colorful river light module
Trigger mode: touch switch
Input voltage:DC 5V (can support 12V, with 12V power supply need to use 12V strip)
Power supply interface: TYPE-C or XH2.54 3P plug LED lights
Power supply voltage: factory DC 5V (12V power supply, use 12V strip)
Maximum working current of single module:≤120mA
Size: 32mm*21mm*10mm
Usage.
1.First plug the 2P touch socket into the module;
2. Then connect the 4P RGB LED socket;
3. Then connect the TYPE-C or 3P XH2.54 plug to supply power, the LED light will be slightly bright;
4. Wait for the touch sensor to the light after the high light, leaving the touch range after the light is off, every touch, the light will be according to the color cycle of the seven colors on.
Note:
The first time you use must be connected to the 2P touch plug, and then connected to the LED socket and power socket energized, touch need to self-test the use of the environment, such as first connecting the power supply, and then touch touch the touch plug will not be able to work properly, you need to re-power self-test will be able to.
List:
1X Module 1X Coil 1X Light Strip