HORMANN GARADOR BiSecur 868MHz Garage Door Remote Control


Feature

The latest BiSecur handheld transmitter for automatic door opening, this system not only makes the transmitter safer,

but also means a more reliable signal, providing a longer working distance.

1. Face to face clone, easy to operate.
2. Metal and ABS material, resistant to drop and wear
3. push cover design, perfect protection of keys
4. The new design is more popular with everyone

Compatible Models

HORMANN HSP 4 BS
HORMANN HSD 2 BS
HORMANN HSS 4 BS
HORMANN HSP4-868-BS
HORMANN HSD2-868-BS
HORMANN HSS4-868-BS
HORMANN HS 1 BS / HS 4 BS / HS 5 BS
HORMANN HSE 1 BS / HSE 2 BS / HSE 4 BS
HORMANN HS1-868-BS / HS4-868-BS / HS5-868-BS
HORMANN HSE1-868-BS / HSE2-868-BS / HSE4-868-BS




Note: Please make sure your original remote control is on the compatible list.

You can see the model number on the back of your remote control.

Delete All Code:

Each button of remote control is assigned to a new radio code by means of the following steps.

1. Open the battery lid and remove the battery for 10 seconds.

2. Press one button of remote control and keep it pressed.

3. Insert the battery,

– The LED slowly flashes in blue for 4 seconds,

– The LED flashes rapidly in blue for 2 seconds,

– The LED is illuminated blue for a long time.

4. Releasethe buttonof remote control, all radio codes are newly assigned.

NOTE:If the button of remote control is released prematurely, no new radio codes are assigned.


Set the Fixed Code 868 MHz

1. Open the battery lid and remove the battery for 10 seconds.

2. Press one button of remote control and keep it pressed.

3. Insert the battery,

– The LED slowly flashes in Blue for 4 seconds,

– The LED flashes rapidly in Blue for 2 seconds,

– The LED is illuminated Blue for a long time.

– The LED slowly flashes in Red for 4 seconds.

– The LED flashes rapidly in Red for 2 seconds.

– The LED is illuminated Red for a long time.

4. Release the remote control button. To test, press any button on the remote control, the LED lights up Red, indicating that it has been successfully converted to fixed code.


Programming with the Receiver

1. Find the "Learning" or "Program" button on the receiver, press it and you'll see the indicator light start flashing.

2. While the indicator light is flashing, press the button on the remote control until the receiver indicator light flashes quickly, which indicates that the remote control has been programmed successfully.(Keep the remote control as close to the receiver as possible when programming)




                   
GDS UK Garage Door Spares LTD