Leather Tools Skiver Cutting Diy Skiving Machine Handheld Splitter Cut Black
Style: Installed directly use style. 
 
Blade width: Approx. 57-60mm/2.24-2.36inch. 
 
(Generally no more than 50mm cut leather as well,The best initial leather thickness is not exceeding 6mm). 
 
Machine dimension: Approx. 18.5*8*5.5cm/7.28*3.15*2.17inch. 
 
Package size: Approx. 20*11*13cm/7.87*4.33*5.12inch. 
 
Weight: About 950g. 
 
Applicable scene: Home; Tailor; Factory. 
 
Fit leather: Soft leather; Hard leather; High-density Leather. 
 
Function: Skiving edge; Skiving Thinner; Segment Skiving; Entire piece Skiving Thinner. 
 

 

Blade Installation:
  • Use a hex wrench to remove the fixing screws of blade clamp.
  • Insert into the blade.
  • Tighten the fixing screws.
  • Viewed from the front,the relative position of the blade and rollers should be parallel.
    		•

     

    Skiving Operation:
  • According to the thickness of the skiving,adjustment the screw of the handle.
  • Open the handle,put the leather between the roller and the blade.
  • The position of the leather should be in the middle of the roller,the tablt can make the leather press against the surface of the roller.
  • The right hand clenched the handle,Pull to the right.
    		•
     
    Thu, 07 Dec 2023 14:19:52 GMT 638375843926246113 D8C7034A4D570369