For sale this Universal Unlocking Interface + version that I built based on the old Dejan dongle plus Max232 serial connection for COM1. The + version also has a FTDI port for virtual COM port emulation. After you install the drivers for the FTDI chip you wipp get a COM port on your computer that you can select when using unlocking software. This is useful of you don't have a Serial RD-232 port on your computer. The Pinout of this port is Universal as well, the same as the Serial port next to it. More details below.
Video demonstration here:
https://youtu.be/Fic06Pr0rXE
It has an M-bus / F-bus switch between bi-directional and full-duplex channels. It has an Universal RJ45 port to fit most cables on the market (Z3X, Furious, Octopus, Redbox, Vygis, Polar box, NCK box, etc) and a Nokia RJ45 port to fit most Nokia cables (UFS, J.A.F, Cyclone, Griffin, MX-key, ATF, etc.) plus NSpro cables for Samsung phones.
The box is versatile and can work with practically any program that requires a virtual COM port, Serial or LPT connection. On the Universal port you can use all the programs in the USR package, so many brands like Siemens, Alcatel, Ericsson, Samsung, Panasonic, Sagem, LG, etc.
On the Nokia side you can use Rolis flasher, various unlockers, DCT3 modding programs, Logo manager, etc.
It is an All-in-one device. It connects to the computer trough the Serial RS-232 port and the Parallel DB25 printer port. The parallel side is used for flashing old DCT3 Nokia phones, the serial side is used as a universal COM1 connector.
It works on all Nokia DCT3 models. See the complete list at the bottom of this page.
It comes with Nokia flash files (see photo) various programs for unlocking, flashing and Modding the phone's software. Also included are over 15000 logos and ringtones and the Logo Manager program to transfer them over.
For the Universal port you will receive the USR program package that includes many tools for unlocking older phones.See list of programs in the photos.
No cables are included! Only the box itself and a link to the software.
The software works best under windows XP or 98. You will need a PC with a LPT printer port and a RS233 serial port (COM1).
No phone cables included. You will need F-bus cables to connect Nokia phones to the box. JAF, Griffin and UFS cables are compatible.
You will need a square USB type B to power the box and also make the virtual COM port, a RS-232 DB9 serial extension cable and a DB25 parallel extension cable (not Null-modem cable!).
For flashing Nokia DCT3, the toggle switch must be set to LPT position and F-bus channel. For unlocking, modding, logo transfer, the switch must be set to Serial position and M-bus channel.
For the Universal port, the toggle switch is set to Serial and F-bus channel (only use Universal set to M-bus to unlock Bosch phones). The USB virtual COM port does not have any switch, it is standalone and does not interact with the other two ports.
Supported Nokia models:
Nokia Third Generation DCT-3
Nokia 2100
Nokia 3210
Nokia 3210
Nokia 3310
Nokia 3315
Nokia 3330
Nokia 3350
Nokia 3390
Nokia 3390
Nokia 3391
Nokia 3395
Nokia 3410
Nokia 3610
Nokia 5110
Nokia 5110i
Nokia 5110i APAC
Nokia 5120
Nokia 5125
Nokia 5130
Nokia 5160
Nokia 5170
Nokia 5170i
Nokia 5180
Nokia 5180i
Nokia 5185
Nokia 5185i
Nokia 5190
Nokia 5210
Nokia 5510
Nokia 6080
Nokia 6081
Nokia 6090
Nokia 6091
Nokia 6110
Nokia 6120
Nokia 6120i
Nokia 6130
Nokia 6138
Nokia 6150
Nokia 6160
Nokia 6161
Nokia 6162
Nokia 6180
Nokia 6185
Nokia 6185i
Nokia 6188
Nokia 6190
Nokia 6210
Nokia 6250
Nokia 7110
Nokia 7160
Nokia 7190
Nokia 8210
Nokia 8250
Nokia 8260
Nokia 8265
Nokia 8265i
Nokia 8270
Nokia 8280
Nokia 8280i
Nokia 8290
Nokia 8810
Nokia 8850
Nokia 8855
Nokia 8860
Nokia 8890
Nokia 9110
Nokia 9110i
Other brands: Any phone and any program that can use COM1 connection. See USR photo for the list of programs that I will provide.
No returns.