The Flux Tork 2200 motor is the centrepiece of the Savage Flux HP, and provides the jaw-dropping power that allows it to do standing backflips on level ground, and easy double backflips off even medium-size jumps! Please note: The Flux Tork 2200 must be used with a speedo that can handle the immense power it requires, the  Flux Blur is the perfect match!

The Flux Tork 2200 features the coolest motor cases we've ever seen, with massive machined cooling fins that really make it look the part of an all-out power plant! With a 5mm motor shaft it can fit the upcoming optional pinion gears so you can get even MORE top speed for those insane runs, or gear it down a bit for increased acceleration on the track. The ideal speedo match for the Tork 2200 is the Flux Blur speedo, the most powerful brushless speed controller we could find. With the ability to handle twin 3S LiPo batteries (that's a total of 6S LiPo power!) it can deal with anything the Tork 2200 motor can dish out! 6.5mm bullet connectors secure the motor wires for loss-free connection to the 12-gauge wires, and to connect to each battery pack we've attached real Dean's connectors for zero power loss and total efficiency. We figured why re-invent the wheel and release our own connector when the best is already available? Topping off the versatility of the Flux Blur speedo (literally) is an integrated cooling fan, which allows the speedo to operate at its ideal temperature.

Finally, you have the ability to easily connect it to your computer for total programming control! With ourUSB Programming Kit you can connect the Blur to any Windows-based PC to control all the various facets of its power delivery, braking, throttle curves, battery cut-off and much more. You can also save various profiles to have profiles for racing, insane speed runs, stunts, fun running and more.

Add the range of optional Flux Tork pinion gears for increased tuning and even more insane acceleration!

HobbyWing QUICRUN-WP-8BL150 Waterproof 150A Brushless ESC Introduction

1 Features

 

1.1 Water-proof and dust-proof for all-weather races.

(Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.) 

1.2 External programming port, easy to connect to the Program Card when setting the ESC. 

1.3 Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment. 

1.4 9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit for different kinds of models, tires and tracks.

1.5 Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection. 

1.6 One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.

1.7 Compatible with the optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.

 

2. Specifications

 

2.1 Cont./Peak Current: 150A / 950A

2.2 Resistance: 0.00035Ω

2.3 Motor Type Supported: Sensorless Brushless Motor

2.4 Car Applicable: 1:8 Buggy / Monster

2.5 Motor Limit: * For 4S Lipo or 12 cells NiMH: 4274-size or smaller motor with the KV<3000

                          * For 6S Lipo or 18 cells NiMH: 4274-size or smaller motor with the KV<2400

2.6 Battery: 9-18 Cells NiMH, 3-6S Lipo

2.7 BEC Output: 6V/3A (Switch Mode)

2.8 Size: 59.5(L)*48(W)*42(H)

2.9 Weight: 178g

2.10 External Program Port: Available

2.11 Working voltage of Fan: From BEC (6V)

3 Program Card (Purchased separately)
 

4 Package Includes

1 x QUICRUN-WP-8BL150 ESC

100% Brand New, Hobbywing Original Products

Parameter List of QUICRUN-WP-8BL150 (Italics and Bolds in the form indicate the factory defult settings)

Programmable Items	Option  1	Option  2	Option  3	Option  4	Option  5	Option  6	Option 7	Option 8	Option 9
1. Running Mode  Note 1	Fwd/Br	Fwd/Rev/Br	Fwd/Rev
2. Drag Brake Force	0%	5%	10%	20%	40%	60%	80%	100%
3. Low Voltage Cutoff	Disable	2.6V /Cell	2.8V /Cell	3.0V /Cell	3.2V /Cell	3.4V /Cell
4. Start Mode (Punch)	Level 1	Level 2	Level 3	Level 4	Level 5	Level 6	Level 7	Level 8	Level 9
5. Max. Brake Force	25%	50%	75%	100%	Disable
6. Max. Reverse Force	25%	50%	75%	100%
7. Initial Brake Force	=Drag brake force	0%	20%	40%
8. Throttle Range	6% (Narrow)	9% (Normal)	12% (Wide)
9. Timing	0  deg	3.75  deg	7.5  deg	11.25 deg	15.0  deg	18.75 deg	22.5 deg	26.25 deg
10. Overheat Protection	Enable	Disable
11. Motor Rotation	CCW	CW
12.Cell Count	Auto-identification	2S LiPo	3S LiPo	4S LiPo	5S LiPo	6S LiPo

Note 1: Fwd=Forward, Rev=Reverse, Brk=Brake