Custom Fit Dash Cover Special Fabric Options: Camouflage, Tech Fabric, or Suede
To Purchase for YOUR Vehicle: Sample Photo of a Dash Cover (not specific to your vehicle):
Why ours?
Our Dash Cover Kits use self-adhesive Hook-and-loop fasteners / Hook-and-pile fasteners for easy installation. Our dash covers are made with foam-backed top quality fabric to help protect the dash board from the damaging direct sun-light and extremee heat. Our dash cover is cut and sewn to perfectly match your dash board. We include allowance for air vents and safety air bags, if present. You won't be getting a "stock" dash cover that doesn't fit. Why Purchase a Dash Cover?
Sunlight Sunlight constantly works against your dash. Heat Heat can cause your dash to buckle. Dust Dust and dirt regularly collect on your dash surface. Special Fabric Options: Camouflage, Tech Fabric, or Suede
DashTech Fabric - Available in: Black #61, Charcoal #62, Beige #63Tech Fabric has a face fabric that is one of the modern "Technical" fabrics you see in new vehicle seat upholstery. It has a small square weave pattern and looks a bit 3 dimensional on the surface. Edge binding is done with matching Dashtech fabric.Camouflage has the famous "Superflauge Game" pattern by Lynch as the face fabric.Edge binding is one color.Suede: 3 Colors - see below Made with a 3 layer factory bonded construction:a Suede Upholstery Fabric on top (face),a foam core and a special scrim fabric backing.It is permanently bonded togetherin a flash oven processthat does not use adhesives.It has a very smooth look.Face materials are Solution Dyed Polyesterwith high UV protection, consistent color andmaximum color fastness over time.Edge binding is color matching Velour Fabric.This material choice will providea soft feel, adjust extremely wellto the dash contoursand provide a smoother look.
Carpet and Velour also available - see our other listings Ordering is a simple process!
Watch your ebay email in case we have a question about your vehicle options -sometimes we need to confirm if you have speakers or something.
More FAQ's
Q: How does the Dashcover fit to the design of my vehicle's dash?Our manufacturer makes all their own patterns and do it by working directly on each vehicle model including models that have options that effect the dash. Our design philosophy is to fit the dash geometry with the best look possible and make sure the coverage is proper for a rich look. Design is part science and part art. We take into account for all the vents, sensors, gauges, displays, options like larger screens for NAV's, etc. We do not design our patterns to cut corners on material or labor. We strive to make the best looking, best fitting dashcover for each vehicle. When looking at the pictures, remember that they are on a flat surface and not on the complicated geometry of a dash. Q: What about AirBags - will the dash cover have a cutout, do I need a cutout, can I specify not to have an airbag cutout?Starting in the early 1990's and depending on your Make/Model and option package, your vehicle may have an Airbag built into the dash on the Passenger side. Many vehicle have a visible Airbag panel. In more recent vehicles, you may not be able to tell exactly where the Airbag is placed because there is no visible panel. When they first arrived on the scene it was thought that dash covers needed to have a cut out for the airbag to deploy if there is a great distance between the edge of the dashcover and the Airbag panel. Many of our patterns have such a cutout. But many patterns do not because the panel is either close to the edge or there is no visible panel. We see a few requests to not make the airbag flap cut because some people prefer the look without it. The Airbag will definately deploy whether or not there is a cutout. Q: What about Speakers in the Dash?We do not make cutouts for speakers. We feel this would defeat the purpose of the dashcover to protect the dash. Sound will travel through the dashcover material quite well so no cutout is needed. Trust us on this - leave them covered. Q: What if my vehicle has sensors on the dash for Automatic Headlights or Automatic Climate Control?When possible, we make our design to include the sensor cutout within a vent cutout so the "cut" is automatic. That way you don't need to know if you have a sensor or if you need to specify you need it cut. Typically, sensors are small and round, about 1" diameter. Sometimes they are not positioned in a vent, then a separate cut must be made. Sometimes every vehicle made for a model has a sensor - in other words it is not an option but a standard feature. Most of the time it's an option and your vehicle may or may not need to have it cut. If the sensor is separate, we always mark it's position on the bottom side. We do not cut unless we know it is for 100% of the vehicles of that model or if you tell us you have a sensor that needs to be cut. FYI, the cuts are so small that no edge binding is sewn there. Q: How can I get custom embroidery on the Dash Cover?Some purchasers want a custom design, art, names or letters embroidered on their Dash Cover. We don't offer that service but you can take it to your local embroidery shop after you receive it. That way you can see the Dash Cover installed on your dash before it's embroidered so you can decide exactly what you want and where you want it. Tape a piece of paper with what you want in the right spot and take it to an embroidery shop where you live! Install is easy! – Please follow instructions below: ! Handling: Never fold the dashcover! Always re-roll carefully for storage. Don’t put heavy objects on the Dash Cover, as they can leave permanent marks or indentations! Installing: 1. Clean your dash before installing. Use provided alcohol pad to clean area where Hook-and-loop fasteners / Hook-and-pile fasteners will be applied. 2. Place Dash Cover on the dash making sure vents and other features line up, use hands to form to contours. 3. IMPORTANT! Push Dash Cover edge into the gap between the windshield glass and the dash. 4. Cut provided Hook-and-loop fasteners / Hook-and-pile fasteners strips into small pieces and match them to the sewn Hook-and-loop fasteners / Hook-and-pile fasteners on back side of Carpet dashcovers or anywhere desired on back side of Velour, Suede, DashTech & Camo Dash Covers. DO NOT REMOVE backing on adhesive until you are sure the dashcover is located exactly how you want it to be. 5. Pull the backing off the Hook-and-loop fasteners / Hook-and-pile fasteners adhesive in one area at a time. Start at one of the edges near the windshield and work across to the other side. It is very important to clean the spot on the dash where the Hook-and-loop fasteners / Hook-and-pile fasteners will be applied. 6. Your new Dash Cover will form to the dash over time and with the heat generated by sun through the windshield. This can take several days or weeks depending on weather conditions Sensors: many vehicles have sensors on the dash. Their location varies widely by make, model and trim level. On some vehicles, the sensor is incorporated into the windshield vent and no extra cutting is required. In other cases, a sensor may be an option (not on all vehicles of a model). In these cases, your Dash Cover will be marked with the sensor location on the back side but will not be cut unless requested at time of ordering. Typically, sensor holes are too small to have sewn binding edges. Speakers: Sound passes through the dashcover quite well so no cutouts are made. Speaker cutouts can be requested on some models when ordering (added cost) but this is not recommended for best dash protection. Defrosting Vents: Make sure to fasten the dashcover well around vents. Make a test with fan on full to see if it is secure. Depending on the model, the Dash Cover design may extend over the edges of vents. This will help protect the vent walls from developing cracks. Cleaning your dashcover: Hand wash with mild detergent in cold water. Air dry.
Delivery time can range from 2 days to 8 days from the day we get all your vehicle information, color choice and payment. They will be custom made for you within 1 business day of receiving all vehicle and color choice information - then ship USPS Priority Mail - we ship on Monday - Thursday each week (not on holidays of course) Please Note! Free shipping only applies to continental US. Additional charges for Alaska, Hawaii and international. |
When possible, we make our design to include the sensor cutout within a vent cutout so the "cut" is automatic. That way you don't need to know if you have a sensor or if you need to specify you need it cut.
Typically, sensors are small and round, about 1" diameter. Sometimes they are not positioned in a vent, then a separate cut must be made. Sometimes every vehicle made for a model has a sensor - in other words it is not an option but a standard feature. Most of the time it's an option and your vehicle may or may not need to have it cut.
If the sensor is separate, we always mark it's position on the bottom side. We do not cut unless we know it is for 100% of the vehicles of that model or if you tell us you have a sensor that needs to be cut.
FYI, the cuts are so small that no edge binding is sewn there.
Hook-and-loop fasteners / Hook-and-pile fasteners hook strips come with each dash cover. They have an adhesive backing. With all Carpet colors, we sew in many small squares of Hook-and-loop fasteners / Hook-and-pile fasteners loop because the hook does not stick well the the back side of the carpet. With all fabric Dash Covers that have foam in the middle layer, the back side fabric acts like Hook-and-loop fasteners / Hook-and-pile fasteners Loop so no small loop squares are sew in. Just stick the hook anywhere.
Also, the forward edge of the Dash Cover may need to be tucked into the space between the dash and windshield glass. This anchors the Dash Cover and holds it in place even with the defrost fan on max.
Using the supplied Hook-and-loop fasteners / Hook-and-pile fasteners is optional. Some people prefer not to use it. Some dashes have complicated geometry and a dash cover will not stay without it. We provide it - you decide if you want to use it.
The adhesive will not harm your dash. However, it may not stick properly if your dash has been treated with a detailing product like Armor All. Use cleaning alcohol to clean areas of your dash where you want Hook-and-loop fasteners / Hook-and-pile fasteners.
As of 5/31/15 we have patterns for the following vehicles: |
2011 | - | 2015 | LEXUS | CT Hybrid | ||
1990 | - | 1991 | LEXUS | ES 250 | ||
1992 | - | 1993 | LEXUS | ES 300 | ||
1997 | - | 1901 | LEXUS | ES 300 | ||
1994 | - | 1996 | LEXUS | ES 300 | ||
2002 | - | 2006 | LEXUS | ES 300, 330 | ||
2013 | - | 2015 | LEXUS | ES Series | ||
2007 | - | 2012 | LEXUS | ES Series | ||
1993 | - | 1997 | LEXUS | GS 300 | ||
1998 | - | 1905 | LEXUS | GS Series | ||
2006 | - | 2011 | LEXUS | GS Series | ||
2012 | - | 2015 | LEXUS | GS Series | ||
2010 | - | 2014 | LEXUS | GX 460 | ||
2003 | - | 2009 | LEXUS | GX 470 | ||
2010 | - | 2013 | LEXUS | HS 250h | ||
2010 | - | 2015 | LEXUS | IS Convertible | ||
2001 | - | 2005 | LEXUS | IS Series | ||
2014 | - | 2015 | LEXUS | IS Series Sedan | ||
2006 | - | 2013 | LEXUS | IS Series Sedan & Coupe | ||
1990 | - | 1994 | LEXUS | LS 400 | ||
1995 | - | 1900 | LEXUS | LS 400 | ||
2000 | - | 2006 | LEXUS | LS 430 | ||
2007 | - | 2012 | LEXUS | LS 460, 600h | ||
2013 | - | 2015 | LEXUS | LS 460,600h | ||
1996 | - | 1900 | LEXUS | LX 450 | ||
1999 | - | 1907 | LEXUS | LX 470 | ||
2008 | - | 2015 | LEXUS | LX 570 | ||
2004 | - | 2009 | LEXUS | RX Series | ||
2010 | - | 2015 | LEXUS | RX Series | ||
1999 | - | 1903 | LEXUS | RX Series | ||
1992 | - | 1900 | LEXUS | SC 300, 400 (rear for 300 only) | ||
2002 | - | 2010 | LEXUS | SC 430 |
1990 |
1991 |
1992 |
1993 |
1994 |
1995 |
1996 |
1997 |
1998 |
1999 |
2000 |
2001 |
2002 |
2003 |
2004 |
2005 |
2006 |
2007 |
2008 |
2009 |
2010 |
2011 |
2012 |
2013 |
2014 |
2015 |
2016 |