Input Voltage (V) | 220-240V 50/60HZ |
Rated Output Power | 2KVA |
Rated Current Consumption (A) | 7 A |
Time request heating up to 800 C | 5-40 Sec depends on the work piece |
Continue heating time | at least 8 Mins |
1. Seized Nuts or Bolts on the Car service, bolt, farm equipment repair purpose.
2. Straighten small hail and other similar dents without painting paint layer without breaking the car, Removal of Strip on auto body parts when you restore or straightening.
3. Burning silent blocks, pressed on beams running gear or other machinery and equipment.
4. Heat treatment of metal parts, hardening, tempering, normalizing.
5. Pressing bearings on a hot landing, as well as flowability.
6. Snyatie small laminated glass sealants for metal.
7. Removing glued on painted metal spoilers, moldings, stickers.
8. The heating of the surface of the hood or other surfaces to be coated vinyl.
9. Removing rust from metal and car body by high-speed heating parts, and flaking rust.
10. Removing paint coating to a metal surface or body cars.
11. Annealing small size of bronze cartridges housing.
This kind of design of coil connector is both ok for air cooling and water cooling type coil.
--Air cooling coil inductor, Copper leads diameter request 3mm to 5mm.
--Water cooing Copper pipe outer diameter max 5mm requested.
In this extend function, the heater with water coil cooling would working time a bit longer than air cooling, water can take away the thermal that help the transformer working longer before overheat protected.
For this kind of emagih heater working frequency 100KHZ, so that it could also heating some tiny workpiece color into red.
It has better formance than 1000W model in 60khz as compared.
About Shipping