Give your Throttle and Clutch pedal a firmer feel with this preload spacer kit.

Kit contains 2x spacers

1x 10mm1x 6mm

We currently run the 10mm in the throttle pedal and the 6mm in the clutch giving a great improvement to the feel.

Remove the pedal plates

Remove the 14 silver screws from the underside

Remove the two bolts at each side of both the clutch and throttle

Pull back the black casing and lift off (this part is under tension) then remove the spring

Place the preload spacer into the recess

Replace the spring and re-assemble

Please contact me with any questions