Speakon to 1/4 Inch Jack Speaker Lead 

Neutrik Black NP2X-BAG Jack1/4 Inch Black Outer Shell. NL2FXX-W-S 1.5mm 2 Core Cable HQ

Handmade by us. We have way over 30 years experience in the pro audio industry.

Choose Length From The Drop Down Menu 0.25 m to 30 m

7mm outer diameter cable. 1.5mm² 2 Core Speaker Cable 100 percent pure copper - made in Germany.

4 percent lead free silver solder is used in the construction of this lead - this makes for a long lasting solder joint that is harder than standard solder.

This lead is designed to go between any passive speaker cabinet and a power amplifier. Connections are made on +1 -1 connections within the 2 pole NL2FXX-W-S Neutrik Speakon connector.

Typical applications for this lead are:

PA systems between power amplifier output and passive speaker

Powered mixer output to passive speaker

From an active speaker's Speakon output to passive extension speaker

Bass or Lead guitar amplifier head output to speaker cab

Linking speaker cabs together

Note a passive speaker is a speaker cabinet without a built in amplifier and is driven solely by a power amplifier.

Cable Length - Important

PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 100mm of cable FREE to compensate for the connectors.

 Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable.

If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.

We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through ebay.

If you want a longer lead let us know.

Ultimate Pro Audio Ltd