Please read very carefully to avoid ordering the wrong item or disappointment - Its all very important information.
It pulls the steering wheel from the tapered, splined or keyed steering shafts.
Generally it fits any wheel with a centre hub of no more than 3.5 inch diameter and a wheel with 3 spokes that are no more than 1.25 inch wide where they meet the centre hub.
It pulls the wheel off with ease if used correctly, often old tractors that didn't have a cab fitted also have a rusted on steering wheel, the puller is also effective at removing rusted on steering wheels although, if it is really rusted on it is your discretion to the force you apply to the puller before it or the wheel breaks - I can offer no warranty or responsibility in this situation.
To use:
Wear safety goggles etc
Undo steering wheel centre nut.
Be careful not to tap/ break instrument gauge glass
Assemble puller onto wheel as in photos
Ensure centre bolt is flush with puller face - it will arrive like this
Turn the 3 outer bolts down the threads equally as far as they possibly go - until the legs are underneath the spokes. (Leave as much thread showing as in the photo's to avoid the legs being any longer than required).
Jiggle the puller- centralise the centre bolt in line with the steering shaft end.
tighten centre bolt clockwise applying force at your discretion as mentioned earlier until wheel is obviously loosened.
Under normal circumstances as previously mentioned the wheel will come off with ease thats even if you couldn't physically pull it off.
ONLY PURCHASE IF YOU UNDERSTAND THE INFORMATION PROVIDED AND ALSO UNDERSTAND THERE IS STRICTLY NO RETURNS ON THIS ITEM TO AVOID FREE HIRE. IF IN THE UNLIKELY EVENT YOU FIND IT DOESN'T FIT YOUR APPLICATION YOU WILL NEED TO KEEP IT FOR ANOTHER DAY/ OUR NEXT PROJECT. THANK YOU FOR YOUR UNDERSTANDING.
I have so far found it to work/fit Massey Ferguson 35, 135,165, 65 David Brown 780, 880, 995, 990,770, various Cropmaster's
Ford International John Deere currently untested.
It is in house/ blacksmith made/ hand crafted by an Agricultural engineer and doesn't come in factory chrome vanadium
I'VE ALSO A STRONGER LARGER PULLER LISTED ON EBAY- MORE SUITED FOR RUSTED ON WHEELS