• Description : Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.
  •  
  • Package Include:
  • Front Bumper Cover*1
  •  
  • Note:

    • Etecgo

    FO1014107 Front Bumper Cover Primered Fit For 2011 2012 2013 2014 Ford Edge

    Description :
    Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.

     

    Package Include:

    Front Bumper Cover*1

     

    Note:

    • In order to deliver the bumper to your hand as soon as possible, The bumper will be placed in a special custom box, but it will not affect its performance.Brand New in the Box - Fit and Quality Guaranteed!
    • If in any case the lip became warped, simply lay it on a flat surface under the sun or use a heat gun gently heat up the warped area. The poly urethane material will restore back to its original shape when heated and stays that way after it cools down.

     

    Reminder:

    • Outdoor Method:

    1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
    2. Open the packaging and remove the bumper cover.
    3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
    4. Let the bumper cover sit in the sunlight for three hours.
    5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.

    • Indoor Method:

    1.Use the cardboard packaging as your work surface and place the bumper cover on top.
    2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
    3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
    4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.

     


    Item Specifics
    Brand etecgo
    Manufacturer Part Number 454365
    Type Bumper Cover
    Placement on Vehicle Front
    Color Unfinished
    Material Plastic
    Finish Primered
    Manufacturer Warranty 1 Year
    Interchange Part Number FO1014107
    Condition New

    Payment

    Delivery details

    Terms of sales

     1.This item come with a warranty.The warranty covers against defective workmanship only,misuse or willful damage will render the warranty void.
       

    2.If the item you have received is defective in any way,please email us for return instructions.We do not allow returns without first requesting an RMA (Retruned Merchandise Authorization).
       

    3.If you have any questions,please contact us via ebay message system. Please DO NOT leave a negative feedback before contact us,We will reply you in 24 hour. We are prompt that we be able to resolve any issue you may have.

    Contact Us

    If you have problem, please do not hesitate to contact us by eBay message. We will respone ASAP.
    We appreciate feedback from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave feedback. Customer service is very important to us , hope you can enjoy our store.

    Etecgo

    Shop Category
     Store Home
     Battery
     TV Parts & Components
     Cell phone Parts & Components
     Video Games & Consoles
     Suspension
     Lighting & Lamps
     Carburetor
     Boat
     Control Arms & Parts
     Auto Valve
     Motorcycle Valve
     Module
     Fuel Injector
     Brakes & Brake Parts
     Car Repair Kit
     Auto Engine System
     Auto Ignition System
     Auto Hub
     Motorcycle Ignition System
     Motorcycle engine system
     Auto Actuator
     Auto Motor
     Auto Inlet & Outlet System
     Auto Circuit Wiring Harness
     Transmission System
     Auto Switch
     Motorcycle Control System
     Auto Sensor
     Motorcycle Pump
     Auto Interior
     Exterior Trimming Parts
     Auto Pump
     Cooling System
     Air Conditioning & Heat
     Auto Fuel System
     Other
    Hot Item
    Picture

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    FO1014107 Front Bumper Cover Primered Fit For 2011 2012 2013 2014 Ford Edge

    Description :
    Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.

     

    Package Include:

    Front Bumper Cover*1

     

    Note:

    • In order to deliver the bumper to your hand as soon as possible, The bumper will be placed in a special custom box, but it will not affect its performance.Brand New in the Box - Fit and Quality Guaranteed!
    • If in any case the lip became warped, simply lay it on a flat surface under the sun or use a heat gun gently heat up the warped area. The poly urethane material will restore back to its original shape when heated and stays that way after it cools down.

     

    Reminder:

    • Outdoor Method:

    1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
    2. Open the packaging and remove the bumper cover.
    3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
    4. Let the bumper cover sit in the sunlight for three hours.
    5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.

    • Indoor Method:

    1.Use the cardboard packaging as your work surface and place the bumper cover on top.
    2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
    3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
    4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.

     

    Item Specifics
    Brand :etecgo
    Manufacturer Part Number :454365
    Type :Bumper Cover
    Placement on Vehicle :Front
    Color :Unfinished
    Material :Plastic
    Finish :Primered
    Manufacturer Warranty :1 Year
    Interchange Part Number :FO1014107
    Condition :New


     1.This item come with a warranty.The warranty covers against defective workmanship only,misuse or willful damage will render the warranty void.
       

    2.If the item you have received is defective in any way,please email us for return instructions.We do not allow returns without first requesting an RMA (Retruned Merchandise Authorization).
       

    3.If you have any questions,please contact us via ebay message system. Please DO NOT leave a negative feedback before contact us,We will reply you in 24 hour. We are prompt that we be able to resolve any issue you may have.

    If you have problem, please do not hesitate to contact us by eBay message. We will respone ASAP.
    We appreciate feedback from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave feedback. Customer service is very important to us , hope you can enjoy our store.


    All rights reserved.