Wireless Remote Control Switch DC 6V 12V 24V 1 Channel RF Relay Latched
Specification
| Style | 1 Receiver + 1 Transmitter |
| Unit Count | 1.0 Count |
| Connectivity Protocol | X-10 |
| Current Rating | 20 Amps |
| Operating Voltage | 24 Volts |
| Mounting Type | Panel Mount |
| Terminal | Solder |
| Control Method | Remote |
| Batteries Required? | No |
| Connector Type | Wireless |
| Item Weight | 2.46 ounces |
| Operation Mode | ON-OFF |
| Batteries Included? | No |
| Item Dimensions LxWxH | 1.85 x 1.02 x 0.71 inches |
| Circuit Type | 1 way |
| Contact Type | 常闭 |
| Contact Material | Plastic |
| Product Dimensions | 1.85 x 1.02 x 0.71 inches |
1.02 inches x 1.85 inches x 0.71 inches. Weight: 2.46 oz
Item Description
- 433 Mhz universal wireless remote control switch: input voltage DC 5.5~24V, working mode is superheterodyne.
- Transmission distance: about 50~100m (open space), if the transmission distance is not ideal, the antenna inside the receiver box can be pulled outside through the round hole of the box, which will be more conducive to reception.Support remote control type: EV1527 learning code. Supports up to 20 remote controllers (if the remote controller is lost, buy one to pair with the PCB board.)
- PCB size: 47 x 26 x 18 mm (L,W,H), output terminals: NO , NC , COM.
- It supports remote and wireless control of your car battery power, garage doors, electronic doors, appliances and other remote control devices, appliances, motorcycle alarms, car sunroofs, heating systems, and more. Bring you a brand new remote control experience, please don't miss it.
- EASY TO USE: There are 4 function modes: Momentary, Toggle，Latched and Delay, please refer to the details page below for pairing. We recommend using the Latched Mode, which uses one button for ON and one button for OFF.
Product Description
DC 5.5-24v Single Channel Controller Technical Parameters
Working Voltage : DC 6V/12V/24V
Modulation Mode:ASK
Matching Mode: Intelligent Learning Code 1527.
Quiescent Current:5mA
Maximum load power: 300W
RF Frequency: 433MHz
Wiring method: NC COM NO
Circuit Board Size: 26 * 47 * 18mm
Output: single-channel passive switch quantity output
Max Relay Contact Current : DC 20A/AC 5A
About Working Modes
Momentary: Press the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle: Press once the remote button, the relay connects , press twice the remote button , the relay dis-connects .
Latching: Press the remote button ON, the relay connects, press the remote button OFF, the relay dis-connect.
Delay Mode: Press the remote button , the output terminal of the receiver will be powered on for a certain time (5s/10s/15s/20s), and the output terminal of the receiver will be powered off.
Reset:Factory reset, this will erase all paired remotes!
Please note:We recommend using the Latching Mode, which uses one button for ON and one button for OFF. If you want to change to another mode, please follow the instructions on the product page to reset the product and select the working mode pairing.
Working mode settings
1.Reset : Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out.
2.Momentary Mode:Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds .
3.Toggle Mode:Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.
4.Latched Mode :Press the receiver button 3 times, the receiver indicator light is always on, the receiver enters the code matching state, and then press the remote control button, the receiver indicator light flashes and then stays on, then press another button on the remote control, after the code is successful, the indicator light goes out.
5.Delay Mode : Press a certain number of times (4 times correspond to 5s/ 5 times correspond to 10s/ 6 times correspond to 15s/ 7 times correspond to 20s) to press the receiver button, the receiver indicator light is always on, the receiver enters the code matching state, then press the key of the remote controller, and the indicator light will go out after the code matching is successful.
Please note:We recommend using the Latched Mode, which uses one button for ON and one button for OFF. If you want to change to another mode, please follow the instructions on the product page to reset the product and select the working mode pairing.
We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
We offer free shipping to the lower 48 states and ship within 2-3 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.
For shipping outside of the continental USA, we only use eBay's Global Shipping Program.The item is shipped to KY and then sent to the rest of the world. International customers are responsible for all duties and taxes. Continue to check out to calculate costs for shipping the item to your country. Messages regarding eBay's Global Shipping Program MUST be directed at eBay EXCLUSIVELY.
We offer a 30-Day Return Policy on items in which you are not completely satisfied with. You have the option of a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA
We try over very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.