free deliveRy AU-Stock orders over $100

au-warranty Local Australian Warranty

australian Long-Term AU-Based & Owned


Transchill arctic black transmission cooler kit - tcb635dpk


Suits Toyota Land Cruiser 300 Series F33A-FTV (3.3L 6cyl) 2022 - On

$529


This transmission cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.

The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.

  • New & Improved model

  • 32mm, 14 row fin & plate design allows for extreme cooling

  • Durable Black powder coat resists oxidisation

  • 100% pressure tested at 150psi for quality assurance

  • Internal tubulation for efficient heat transfer

  • Up to 50% more efficient (*heat transfer rate – BTU/hr)

  • Pre-drilled mounting plates for easy installation

  • Inlet & Outlet size: M16 fittings

WHY DO YOU NEED ONE?

Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.

Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.

HOW IT WORKS

The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.

AUTOMATIC TRANSCHILL CONTENTS:

    • Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets

    • All mounting hardware included

    • ATF Hose (Meets or exceeds SAE J1019 requirements)

    • 1x Davies Craig Black 32mm 14 row oil cooler

    • 3yr Warranty *Conditions apply


Please provide your VIN to ensure the correct part for your vehicle is dispatched. 

This part must be fitted by a qualified diesel mechanic.

 

About Us

Hi Tech Diesel Injection was established in 1998 and employs 16 staff. Hi Tech Diesel Injection are specialists in offering repair, service and parts for diesel fuel injection and turbochargers. We are RAA approved and are warranty authorised dealers for Bosch, Zexel, Denso, Delphi and Stanadyne. We are also a Garrett authorised centre and achieved the Capricorn Million Dollar Supplier Award in 2012.

PRODUCTS AND SERVICES

Fuel Injection Pumps - Hi Tech Diesel Injection satisfy the rigorous standards of diesel fuel injection manufacturers such as Bosch, Denso and Delphi. Pressurised rooms are used to repair most common fuel injection products and a clean room has been installed for specialised repairs.

Injectors - servicing of injectors is our specialty, whether it is a single or dual spring application. All injectors are repaired using genuine parts set to manufacturers specifications.

Qualified Technicians - are factory trained by fuel injection manufacturers in the latest techniques to ensure that quality standards are achieved. This offers peace of mind knowing that experienced technicians are repairing your product.

Testing Facilities - utilise the latest computerised test benches to increase speed and accuracy to reduce down time and save you money

Exchange Products - Our exchange products are repaired to quality standards and are available for a large range and variety of vehicles both mechanical and common rail. All exchange products are covered by an impressive 12-month guarantee.

Diagnostic and Troubleshooting - including dyno and scan tools.

Shipping & Returns

Terms and Conditions of Sale of Parts ? Hi Tech Diesel Injection Pty Ltd

 

Unless otherwise stated in our Quotation or agreed in writing, it must be clearly understood that acceptance of your Order is subject to acceptance of our standard conditions printed below.

1.             Delivery

Any items or dates quoted for despatch or delivery, following our acceptance of your order are based on receipt by us of full and final instructions enabling us to proceed uninterruptedly with the work. We cannot accept responsibility for any delays due to causes outside our control. Extra charges will apply to specially procured items.

2.             Claims

All claims for missing items must be made to our Company within 24 hours of receiving goods. Visible damage must be reported to and claimed upon your Transport Company of your Insurance Company. We do not accept any responsibility for loss or breakage of goods in transit.

3.             Return of Goods

Credit will not be considered unless goods are returned freight prepaid. Original invoice number and date must be quoted. Credits may be allowed at our discretion only upon the following conditions.

(a) Items with a value exceeding $500 are not refundable for credit.

(b) If goods are returned to our store within 14 days of date of supply - Invoice value less 2½%.

(c) If goods are returned within 15 to 21 days from date of supply - Invoice value less 10%.

(d) Goods "especially procured" to customer order must be confirmed by an Order in writing and are not eligible for return or credit.

NO RETURNS accepted after a period of 21 days from date of supply.

4.             Customer's Property

Customer's property supplied to us will be held entirely at the customer's risk as regards to fire or other unforeseen damage, unless otherwise arranged. Every care will be taken to get the best results where materials are supplied by the customer, but we do not accept responsibility for imperfect work caused by defective or unsuitable materials so supplied.

5.             Limits of Offer

Our quotation covers only the equipment listed in the Basic Specification of Equipment offered.

All descriptive material, drawings, particulars of weights and dimensions submitted with our quotation are approximate. Certified information for installation purposes will be supplied on request.

6.             Performance

Any performance figures given by us in our quotation are based upon normal design experience and are such as we expect to obtain on test. We will, however, accept no liability if these figures are not obtained, unless they are specifically guaranteed in writing in which case they would be subject to the recognised tolerance and rejection limits applicable to such figures.

7.             Storage and Insurance

If by reason of your instructions or lack of instructions we are unable to ship the goods within fourteen (14) days after notification of readiness for despatch, we may arrange for suitable storage and insurance until the goods are despatched, and charges for storage, insurance, transport and other costs incidental thereto may be charged to your account.

8.           Limitation of Liability

We shall not be subject to nor incur any claim, action or liability for consequential damage, loss of use or of profits. Our liability ceases on delivery to authorised third party carriers.

9.           Acceptance

Accepting delivery of goods detailed in this invoice is acceptance by the customer of the above Conditions of Sale.


Please ensure you are ordering correctly. If in doubt, supply a VIN to ensure the correct part is being supplied as goods will not be credited for incorrectly ordered parts or you changed your mind.

We do not send parts which are broken; please check goods for damage before signing delivery note. All our parts are id stamped before we send them. If a part is found to be not working correctly within 7 days of receipt* by the purchaser, the purchaser must return the part at the receivers expense to us for validation. 

Postage - Postal charges including packaging and handling are clearly shown within the auction listing. If you bid, you are deemed to have accepted the shipping charges quoted.
International shipping may be subject to import duties or other taxes.

Dispatch Times -
We normally dispatch your order within 48 hours daily expect Sunday and Public Holidays. Once your order has been sent you will receive notification by email. Your goods will be shipped from South Australia. Goods are normally sent by Post or Toll Priority.

Terms & Conditions

Payment - All payments must be received within 3 days of auction end by Pay Pal

Postage - Postal charges including packaging and handling are clearly shown within the auction listing. If you bid, you are deemed to have accepted the shipping charges quoted.
International shipping may be subject to import duties or other taxes.

Dispatch Times - We normally dispatch your order within 48 hours daily expect Sunday and Public Holidays. Once your order has been sent you will receive notification by email. Your goods will be shipped from South Australia. Goods are normally sent by Post or Toll Priority.

You are responsible for postage payment back to ourselves.

If you cannot return your old unit within this period it may result in the unit being rejected or only part of the surcharge being refunded

All surcharge refunds will be put into the account they were purchased from.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.