• Condition: 100% new
• Color: Blue
• Material: Metal&PVC
• Size: As picture shows
• Nozzle size: 1.4mm/2.0mm
• Cup Volume: 600cc
• Air Inler: 1/4 NPT or 1/4 BSP
• Operating Pressure: 50-70PSI
• Air Consumption: 1.6-4.0 CFM
• Compressor Required: 2-3HP
• Item included:

  1x Spray Gun

  1x 600ml Plastic Cup

  1x Locking air pressure regulator

  1x Wrench

  1x Screws

  1x Brush

  1x Filter

  1x User manual

  Compatible With: fit for all the cars

• This Is Aftermarket Replacement Item But Not Genuine

• Note:

  1) All dimensions are measured by hand, there may be small deviations.

  2) Color may vary slightly due to the color setting of each individual monitor.

Product Dimension:

Attribute:

Feature:

1) 100% new with good quality.

2) A professional Gravity Feed HVLP(High Volume Low Pressure)Spray Gun with Fluid Tip and Regulator.

3) This spray gun supplies low pressure through the air cap which makes the spraying softer, easily controlled and less overspray in high transfer efficiency. Ideal for spraying basecoats, clearcoats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc.

4)Designed to provide equal atomization and partical size for all kinds of surface painting.

5) Stainless steel needle and nozzle accommodate a variety of coatings.

6) Light weight, ergonomic design and easy trigger pivot reduces operating fatigue.

7) 3 Knobs for full adjustment: Fluid, Pattern and Air Pressure Controls.

8) 600cc Plastic Fluid Cup.

9) By adjusting the pattern adjustment knob and the fluid adjustment knob, it is possible to easily obtain a desired pattern and fine atomization.

10) Pattern adjustment: Rotate the pattern adjustment knob to the right until the spray pattern is rounded or rotated to the left to make the spray pattern oval.

11) Fluid adjustment: Rotate the fluid adjustment knob clockwise to decrease the fluid output and counterclockwise to increase the fluid output.