Logo

Detail

DRAGON 6980 1/35 WWII German Sd.Kfz.251/1 Ausf.D w/EZ Track /Guns&Equipment Part
 
 
[About the actual vehicle]
- One of the armored half-tracks operated by the German army in World War II is Sd.Kfz.251.
- Sd.Kfz.251 is an armored personnel carrier developed based on the 3t half-track, and was used to tow various types of artillery, and many derivatives have also been made.
- The D type is a late production model, and various parts have been simplified to improve productivity.
- The car body design was also characterized by being simpler than the previous models A to C.
- Production began in September 1943, and it is said that over 10,000 units were produced until the end of World War II.
- The basic type can accommodate 10 soldiers in the troop compartment.
- The engine is equipped with a Maybach HL-42 inline 6-cylinder, and the maximum speed is approximately 50km/h.
- Equipped with one 7.92mm machine gun each in the front and rear of the open-top personnel compartment.
- Until the end of the war, they continued to fight bravely together with tank units as soldiers' feet.
[About the product]
- The model is a 1/35 scale plastic model assembly kit that reproduces the D type, a late production type of armored personnel carrier Sd.Kfz.251.
- The vehicle body has a simplified design exterior of the Sd.Kfz.251D type, and is firmly modeled with a total length of approximately 170mm.
- The open-top troop compartment is also recreated in detail.
- The gun rack and communication device are also reproduced to create a mechanical finish.
- The canopy that covers the troop compartment comes with parts that reproduce three states, including fully open and partially open. You can enjoy the difference in facial expressions.
- The track uses EZ tracks that can be easily assembled.
- The details are also very realistic, with delicately expressed starting wheels and running wheels.
- In addition, this kit includes a decal sheet that reproduces a variety of vehicle numbers, unit marks, etc.
- You can choose and assemble 9 troop vehicles.
- Also includes small arms sets such as StG44, MP40, G41, MG34, and 42, anti-tank firearms such as Panzerfaust 60 and RPzB54 Panzerschreck, and a rich set of equipment such as helmets and rice bowls. This is a kit with a lot of content.
[Major features]
- Reproduce the German Sd.Kfz.251 Ausf.D armored personnel carrier in 1/35
- Finished total length is approximately 170mm
- The track uses a prefabricated EZ track.
- A rich set of small firearms and accessories
- Markings can be selected from 9 types
- Metal vehicle width display pole included
 
 
WW.II German Sd.Kfz.251/1 Ausf.D w/EZ Track /Guns & Equipment Parts (Plastic model) Other picture1
WW.II German Sd.Kfz.251/1 Ausf.D w/EZ Track /Guns & Equipment Parts (Plastic model) Other picture2
WW.II German Sd.Kfz.251/1 Ausf.D w/EZ Track /Guns & Equipment Parts (Plastic model) Other picture3

Copyright©2017 DataCaciques

         Welcome to

          my  shop

Detail

 Store activity: If you buy it now, we will sent you a Special Gift !!

if you order more than 2 items. then you will get discount. please review out activity detail.  thanks.

(Not including every listing. review my offer center: https://www.ebay.co.uk/sme/wonderland*/offers.html)

DRAGON 6980 1/35 WWII German Sd.Kfz.251/1 Ausf.D w/EZ Track /Guns&Equipment Part
 
 
[About the actual vehicle]
- One of the armored half-tracks operated by the German army in World War II is Sd.Kfz.251.
- Sd.Kfz.251 is an armored personnel carrier developed based on the 3t half-track, and was used to tow various types of artillery, and many derivatives have also been made.
- The D type is a late production model, and various parts have been simplified to improve productivity.
- The car body design was also characterized by being simpler than the previous models A to C.
- Production began in September 1943, and it is said that over 10,000 units were produced until the end of World War II.
- The basic type can accommodate 10 soldiers in the troop compartment.
- The engine is equipped with a Maybach HL-42 inline 6-cylinder, and the maximum speed is approximately 50km/h.
- Equipped with one 7.92mm machine gun each in the front and rear of the open-top personnel compartment.
- Until the end of the war, they continued to fight bravely together with tank units as soldiers' feet.
[About the product]
- The model is a 1/35 scale plastic model assembly kit that reproduces the D type, a late production type of armored personnel carrier Sd.Kfz.251.
- The vehicle body has a simplified design exterior of the Sd.Kfz.251D type, and is firmly modeled with a total length of approximately 170mm.
- The open-top troop compartment is also recreated in detail.
- The gun rack and communication device are also reproduced to create a mechanical finish.
- The canopy that covers the troop compartment comes with parts that reproduce three states, including fully open and partially open. You can enjoy the difference in facial expressions.
- The track uses EZ tracks that can be easily assembled.
- The details are also very realistic, with delicately expressed starting wheels and running wheels.
- In addition, this kit includes a decal sheet that reproduces a variety of vehicle numbers, unit marks, etc.
- You can choose and assemble 9 troop vehicles.
- Also includes small arms sets such as StG44, MP40, G41, MG34, and 42, anti-tank firearms such as Panzerfaust 60 and RPzB54 Panzerschreck, and a rich set of equipment such as helmets and rice bowls. This is a kit with a lot of content.
[Major features]
- Reproduce the German Sd.Kfz.251 Ausf.D armored personnel carrier in 1/35
- Finished total length is approximately 170mm
- The track uses a prefabricated EZ track.
- A rich set of small firearms and accessories
- Markings can be selected from 9 types
- Metal vehicle width display pole included
 
 
WW.II German Sd.Kfz.251/1 Ausf.D w/EZ Track /Guns & Equipment Parts (Plastic model) Other picture1
WW.II German Sd.Kfz.251/1 Ausf.D w/EZ Track /Guns & Equipment Parts (Plastic model) Other picture2
WW.II German Sd.Kfz.251/1 Ausf.D w/EZ Track /Guns & Equipment Parts (Plastic model) Other picture3
 

                  payment Policy

We only accept PayPal. It is fast,easy and safe, i think it's best for us, thank you very much.

                       shipping Policy

It takes about 15-20 business days to ship to UK , USA , AUS, Canada 

It takes about 25-30 business days to other European countries

shipping requires more complicated shipping procedures (such as both countries customs, transit stations etc.), it will probably take longer . Thank you for your understanding on this matter.

 

             Return Policy

*We will refund only for faulty items.If you have chosen the wrong size we can exchange but postage for the both ways to be paid by purchaser.please contact us if you have any problems before leaving negative feedback.We bag your pardon that due to the high shipping cost exchange or return is not offered.We provide excellent customer service and believe that most problems,can resolved to the satisfaction of both parties please ask questions prior to purchase.

 

            Contact us

Customer satisfaction is important to us and our feedback rating reflects it . If you have any questions before and after your purchase,Do not hesitate to contact us , we welcome you to email us, we strive to answer all questions and resolve any problems as quickly as possible.

 

Please leave us your positive feedback and 5-star rating if you are satisfied with our items and service. You will be greatly appreciated. If not quite satisfied, please do contact us before leaving the feedbacks. We will surely solve the problem for you satisfactorily. (100% communication, 100% refund, 100% replacement) Please do give us a chance to make things right before any negative or neutral feedback left

 


On Feb 2, 2024 at 04:35:14 PST, seller added the following information:

DataCaciques