Description

■Tri-Dimensional Reverberation Machine

Ledges is a compact reverb pedal featuring room, hall, and plate.
Its characteristics are similar to EQD, as the core of the original sound remains, so no matter how deep and long the reverb is set, it will not become saturated and the sound will not be crushed.
Every reverb mode has a setting that causes the space to shake slightly, creating a unique dark atmosphere.
Furthermore, by lowering the damping (sound absorption rate of the space), high-frequency feedback begins to be applied, creating a fantastical space that is different from the shimmer type.

His three built-in reverbs are carefully selected spaces from his 700+ circuits by his EQD developer Jamie Stillman.
To give you the full feeling of space, Ledges uses buffered bypass, so the reverberation remains even when the effects are turned off.
Like many of his EQD effects, the Ledges allows you to connect an expression pedal and control any of the Length, Damping, and Mix parameters with your foot.


●Mode R: Room Reverb
Room mode is the reverberation mode with the shortest box reverberation. Every time you turn the knob up, the boxy sound gets louder.

Control

Length
Adjusting the reverb length. This mode is the reverb with the smallest boxy sound on the pedal.

Damping
Adjustment of the high frequency range of the reverb component.

Mix
Adjusting the amount of reverb mixed with the original sound.

●Mode C: Hall Reverb
In hall mode, each time you increase the length, a church-like sound is added, creating a boxy sound with complex reflections and a sense of distance.

Control

Length
Adjusting the reverb length. From hall reverb to cathedral reverb.

Damping
Adjustment of the high frequency range of the reverb component.

Mix
Adjusting the amount of reverb mixed with the original sound.

●Mode P: Plate Reverb
In plate mode, the bounce of the reverberant sound increases, creating an almost infinite amount of reverberation.

Control

Length
Adjusting the reverb length. From recording studio plate reverbs to almost eternal reverbs.

Damping
Adjustment of the high frequency range of the reverb component.

Mix
Adjusting the amount of reverb mixed with the original sound.


●Common functions

・Operating Modes
Ledges has two modes, and you can distinguish the modes by the color of the Save/Recall switch.
In Live mode, the sound will be output according to the settings of each knob, and the saved Preset settings will not be affected. The Save/Recall switch will illuminate green.
Preset mode allows you to use Ledges with settings stored in a Preset. Save and select tones from the Preset knob; the knob settings are ignored when using this mode. The Save/Recall switch will illuminate red.

・Presets
Ledges is equipped with 6 Presets that allow you to save your favorite settings. You can save and recall the settings of each knob, mode, and assigned expression pedal settings to your desired number from 1 to 6. Please note that certain presets are not saved when the item is shipped.

・Expression Control
Length, Mix, and Damping can be controlled externally using a TRS-specification expression pedal. The expression assignment when leaving Ledges is set to Rate, but you can change the assigned function using the following method. It is also possible to input Control Voltage and CV. The CV range is from 0 to 0.3v.

・Flexi switching
This product is equipped with Flexi-Switch(R) functionality. It is an electronic relay type true bypass and can be used as a normal latching type switch or a momentary switch (unlatching type) depending on how you press it.
When using it as a latch type switch, just like a normal effect switch, press it once when you want to turn it on, and press it once again when you want to turn it off.
When used as a momentary switch, the effect will be on only while the switch is depressed, and will be off once the switch is released.
Ledges uses buffered bypass, so the reverberation continues to be heard even when the pedal is turned off. If the power supply is not connected, the input signal will not be output.

Payment

Please pay within 4 days after purchase.

Shipping

Please refer to Shipping and handling.

About other area, please ask me.

Returns

Returns are accepted ONLY if the item was not the item described.

International Buyers - Please Note: 

* Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. 
* Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.