DJI Mavic 3 Thermal
The
Mavic 3T is a lightweight and versatile drone which supports visual
data collection, hybrid zooming, and high-resolution thermal capturing,
making it ideal for public safety, inspection and night operations.
An
RTK Module can be added to give the drone improved accuracy, and the
addition of a high volume speaker will make the M3T well-suited to
public safety and search and rescue missions.
Designed for portability
Weighting
only 920g the Mavric 3T is lightweight and portable with a long battery
life that still gives you up to 45 minutes of flight time.
High-class sensor camera
The
powerful Hasselblad camera used in the M3T has the same specs as the
M3. The M3T integrates a Wide Camera, a Tele Camera, and a Thermal
camera to support multiple shooting situations.
The 48MP wide-angle camera features a 1/2 inch CMOS sensor and a 24mm equivalent focal length.
The 12MP tele camera features a 1/2 inch CMOS sensor, a 162mm equivalent focal length, and supports up to 56x hybrid zoom.
The
thermal camera has a Display Field of View (DFOV) of 61°, a 40mm
equivalent focal length, and a 640 x 512 px resolution. This camera
supports both point and area temperature measurement, together with
high-temperature alerts, colour palettes, and isotherms to help you find
hot spots.
Enhanced transmission and safety
4
antennae, 2 transmitters, and 4 receivers allow a range of 9-15
kilometres when flying in an area with low interference, and a range of
1.5-3 kilometres even in areas with strong interference.
Omnidirectional
obstacle sensing is delivered through the use of multiple wide-angle
vision sensors that work together with the drone’s computing engine and
DJI APAS system 5.0 to sense and avoid obstacles in their flight path.
The drone also includes an advanced RTH (Return-To-Home) setting which
no longer needs to climb to a set altitude to find the optimal route
back to its home point. DJI’s Air Sense software increases your peace of
mind as it receives ADS-B signals from traditional aircraft in the area
to increase your awareness and warn you of any air traffic nearby.
On
top of the flight safety features, the DJI Mavic 3 Thermal has a series
of security and privacy features to safeguard the integrity of your
photos, videos, flight logs, and other sensitive data. Local Data Mode
further stops the DJI Pilot 2 flight control app from sending or
receiving any data over the internet when activated. The M3T also
supports up to 28x synchronised zoom between thermal and visual cameras
which can both be scaled at the same time, making it easier to compare
details side-by-side.
Smart controller
The DJI RC Pro
Enterprise features a 5.5 inch, 1000-nit high-brightness screen, to
reduce sun glare, in addition to a built-in microphone, and 3 hour long
battery life, which can be charged even when in operation.
Compatible software
A
full software suite enables the M3T to operate at its full potential
with tools for data gathering, mapping, and flight management. These
include DJI Pilot 2 which is built-in to the remote control for improved
piloting efficiency and flight safety, DJI Flighthub 2 for live
streaming, media upload, and mission planning, DJI Terra for 2D/3D
reconstruction, and DJI Thermal Analysis tool 3.0 for creating reports
and manipulating radiometric thermal data with the specific parameters
following data capture.
Key features
- Foldable and portable design
- Versatile data collection
- 48MP Wide camera with 1/2 CMOS sensor
- 12MP Tele camera with 56x hybrid zoom
- 640x512@30Hz Thermal camera
- Lightweight 920g
- Ultra-long battery life (45min fly time)
- Omnidirectional obstacle sensing
- Advanced Return-To-Home
- DJI RC Pro Enterprise smart controller
What’s in the box?
- 1x DJI Mavic 3 Thermal Drone
- 1x Flight Battery
- 1x 64GB Micro SD Card
- 1x Gimbal Cover
- 3x Propeller (Pairs)
- 1x DJI RC Pro Enterprise Smart Controller
- 1x Standard Charger (100W)
- 5x AC Cable (For different plug types)
- 1x USB to USB-C Cable
- 1x Dual USB-C Cable
- 1x Protective Carry Case
- 1x Screwdriver Tool
- 1x User Manual